Marhamat tumanida joylashgan 18-maktab CHQBT raxbari Hasanboy Boltaboyev tomonidan 14-yanvar Vatan himoyachilari kuniga bagʻishlab tayyorlagan videoroligi.

Marhamat tumanida joylashgan 18-maktab CHQBT raxbari Hasanboy Boltaboyev tomonidan 14-yanvar Vatan himoyachilari kuniga bagʻishlab tayyorlagan videoroligi.

The line graph gives information how much daily demand is for electricity in Uzbekistan in winter and summer .

It is clear that in the winter season , there were partial growths in the amount of electricity consumption . If we compare demand is for electricity in summer, this indicator is so much lower than in winter. It is clear that the demand for electricity saw slightly fluctiations in terms of consumption

The figure illustrates the process involved in the production of ceramic pots.

It can be seen that there are three main stages in the process, beginning with the obtaining of raw materials for producers. Overall, some processes happen before finished pots are produced.

At the beginning of the process,
The necessary raw materials are obtained by cranes and are delivered to factory. In the factory, after the materials are crushed, they are mixed with water, and then the mixture is moulded. At the second of the process, the moulds are dried for 4-5 hours. Following that, the assembling process is happened.

At the third of the process, clay pots are left in oven thousand degrees Celsius before they are coloured. Pots with colour are taken to firing process, and finished clay pots are ready at the end.

The diogram gives information how to make ceramics pots in terms of production.

It can be said many porcesses took place to get finished products . This diagram includes thrid main stages. Owerall , this diagram expirenced many processes before getting the finished product.

At the begining of the procsses, the necesary raw materials are mined through pits and brought to the production plant by trucks and then the raw materials are poured into molds and mix with water. They are moulded by equipment and heated 4 -5 ours to dry and after that it became semi- finished products .

Coming to the thrid period of the process ceramic pots were painted by workers and put on fire for drying in special ovens, and at the end of the period ceramic pots are ready

This diagram shows production process of the smoked fish

The diagram gives information about how smoked fish are prepared by people.

It can be seen that there are three main stages in this manfacturing process, beginning with preparation of raw materials cofe beans.

Looking at the beginning of the process, coffe beans are picked up by workers and are processed using special equipment. Next, the separated coffee beans are laid to dry in sunshine by workers. Dried coffee beans are hulled, and then roasted in an oven for 10 -15 minutes.‌‌

Translation: en-null
The diagram gives information about how smoked fish are prepared by people.

It can be seen that there are three main stages in this manfacturing process, beginning with preparation of raw materials cofe beans.

Looking at the beginning of the process, coffe beans are picked up by workers and are processed using special equipment. Next, the separated coffee beans are laid to dry in sunshine by workers. Dried coffee beans are hulled, and then roasted in an oven for 10 -15 minutes.‌‌

Looking at the next process, this process includes processes from product packaging to delivery to consumers. The first thing coffees are packaged by workers in papers or plastic bags, and then coffee beans transported coffees to cars. Cars delivers coffees to consumers

The diagram gives information about how aluminium drinks cans are made

It can be seen that the production process of aluminium drinks cans includes 3 maine stages, aluminium dishes are collected and delivered for recycling.

At the beginning of production process aluminium drinks canes are separated steel and aluminium and delivered for recycling centre. Dishes that arrived are milted with heat. Old aluminium milled and Molten aluminium is poured in special pot and new aluminium is produced.

Looking at the next process, New aluminium is changed aluminium roll. At the end of production process aluminium drinks cans are ready for using .Finished aluminium drink bottles are drliverd to customers. The process continues based on the system.

The figure gives information about how the aluminium drinks cans are made.

Overall, it can be seen that there are 3 main stages in the manufacturing process, beginning with the collection of aluminium drinks cans for production. The new drinks cans are delivered, with the old ones recycling in special centres.

Looking at the beginning of the process, once wasted cans in the recycling beans are brought to collection centres, initial sorting stage takes place, where aluminium cans are separated from steel ones. Following this, the two types of cans are delivered to recycling centre, and then the second main stage is started. In the recycling centre, the first thing to be done is that the old aluminium is melted down so that the new aluminium can be produced. After that, the aluminium material is turned to aluminium rolls before new aluminium cans are made.

At the final stage of the process, the new cans are delivered and put into special drinks machines for consumers. And the cycle starts a new.

The line graphs gives information about three different books, children's books

The line graph gives information about three kind of books, children's books, adult fiction, educational books that are sold from 2002 to 2006.

It is clear that the number of books are sold expirensed significant change over the period shown. Overall the amount of books that were bought by young people reached considerably growth at the end of the year. As for adult fiction. This figure losed its trend, being less sold then other. At a time when adult fiction go down, there were considrabl change in the number of educational books.