I Need to Talk About Something Serious (KernelSU-Magisk Vulnerability)
A few months ago, I found a serious vulnerability in Magisk & KSU (and their forks). This flaw gives full root access to an attacker, meaning they can control your device completely, inject malicious code, install trackers, or even brick it permanently. Basically, anything which is possible with root access, And it’s very easy to exploit.
What makes it worse is that this exploit can work like either rat poison or sweet poison it can either harm your device instantly, or it could be damaging it silently right now without your knowledge. I don’t want to give too many hints, but honestly, this is more dangerous than any exploit I’ve seen so far.
At the time, I didn’t report it because it’s shockingly easy to exploit, and I was honestly scared that if the wrong person saw it before it got fixed, it could cause serious damage to a lot of people. I’ve tried different ways to block or patch it on my end, and while I did find a workaround, but it's just a temporary band-aid, not a solution.
I’m genuinely worried about this. I don’t want to be the reason something bad happens, but I also don’t want to stay silent if the damage is still possible
Should I report this vulnerability now?
Or should I wait knowing someone else might already be exploiting it and risk a mass attack on rooted devices? Or should I raise awareness about how it works and how people can protect themselves from becoming victims
Please share your thoughts. Your suggestions will help me decide the best way forward.
~ Regards @MeowDump
A few months ago, I found a serious vulnerability in Magisk & KSU (and their forks). This flaw gives full root access to an attacker, meaning they can control your device completely, inject malicious code, install trackers, or even brick it permanently. Basically, anything which is possible with root access, And it’s very easy to exploit.
What makes it worse is that this exploit can work like either rat poison or sweet poison it can either harm your device instantly, or it could be damaging it silently right now without your knowledge. I don’t want to give too many hints, but honestly, this is more dangerous than any exploit I’ve seen so far.
At the time, I didn’t report it because it’s shockingly easy to exploit, and I was honestly scared that if the wrong person saw it before it got fixed, it could cause serious damage to a lot of people. I’ve tried different ways to block or patch it on my end, and while I did find a workaround, but it's just a temporary band-aid, not a solution.
I’m genuinely worried about this. I don’t want to be the reason something bad happens, but I also don’t want to stay silent if the damage is still possible
Now I’m stuck and really need your advice:
Should I report this vulnerability now?
Or should I wait knowing someone else might already be exploiting it and risk a mass attack on rooted devices? Or should I raise awareness about how it works and how people can protect themselves from becoming victims
Please share your thoughts. Your suggestions will help me decide the best way forward.
Also, please don’t DM me asking what the vulnerability is😬 If I felt it was safe to share, I would’ve already. Thanks for understanding.
~ Regards @MeowDump
10❤123🫡43👍21🗿9👀6💋3🏆2💊2🔥1💯1👾1
Which of the following approaches would you recommend? (Multiple selections allowed)
Anonymous Poll
33%
Create an public issue on Magisk/KSU repo
65%
Report it to Magisk/KSU devs via email/dm (privately)
25%
Make people aware how it works
6%
Don't do anything, let it happen
2👍77🫡24❤13🗿10💋9😱8🔥3🏆2
i got a response, and it turns out 🫚 KSU and 🎭 Magisk can’t prevent this issue.
The only smart move now is to spread awareness before someone actually exploits it and takes out devices in bulk. Maybe someone else will figure out a fix. I’m sharing a screen recording, watch it carefully and share it with someone who's device is rooted
(I already knew this, that’s why I made the poll. If I had dropped the awareness directly, many would’ve just blamed me or said I’m promoting it🙌 )
The only smart move now is to spread awareness before someone actually exploits it and takes out devices in bulk. Maybe someone else will figure out a fix. I’m sharing a screen recording, watch it carefully and share it with someone who's device is rooted
Please open Telegram to view this post
VIEW IN TELEGRAM
👍94❤36🗿21😱8🫡4👨💻2😁1🆒1
Media is too big
VIEW IN TELEGRAM
Not everything labeled “open source” is actually safe, and not everything on GitHub is what it looks like. Don’t blindly trust random Magisk modules floating around, stick to trusted sources.
At the end of the day, your device and your data are your responsibility.
📱 𝗠𝗘𝗢𝗪 𝗗𝗨𝗠𝗣
At the end of the day, your device and your data are your responsibility.
Please open Telegram to view this post
VIEW IN TELEGRAM
2🗿182❤106🫡51🔥24👍18😁13😱12👻12👌4🆒4👏2
𝗠𝗘𝗢𝗪 𝗗𝗨𝗠𝗣
Built specially for non root users
Please open Telegram to view this post
VIEW IN TELEGRAM
❤84🗿19🔥14👍12💋9🥰2😱2👾2💊1
HMA.json
24.3 KB
Import this file in HMAL / HMA
last updated on 11 september 2025
2❤146💋20🗿10👍7🔥7🏆5😱4👻4🫡3
v17.1-Integrity-Box-07-09-2025.zip
388.5 KB
v17.1 by 𝗠𝗘𝗢𝗪𝗻𝗮 💅
changelog-
Changelog v17.1
• Fixed “operation not permitted” error during installation.
• Removed self-destruct mode.
• Fixed Hide PIF Detection button not working.
• Cleaned up unnecessary code.
• Changed module ID.
• Fixed module denoscription not updating for Magisk users.
• Fixed action summary result bug.
• Improved PIF fork spoofing noscript
• Removed anti-tampering detection, (It’s not stable yet and needs a lot more testing and fine-tuning. I don’t have enough time to keep it in right now. Maybe in the future when I get the chance, it will come back in a better form)
Changelog v17
• Updated Keybox
• Cleaned debug fingerprint by default
• Introduced Anti Tampering Protection
• Introduced Self Destruct mode
• Added SHA512+SHA256+MD5 hash with salt verification on install
• Fixed banned kernel false positive indicator
• Create NoLineageProp flag in /data/adb/Box•Brain to clean LineageOS props
• Added verification summary on install
• Added spoofVendingSdk support for PifFork spoofing [WEBUI]
• Fixed delay handler for KSU [ACTION]
• Fixed TS patch button not working [WEBUI]
• Dropped target.txt auto update on boot
• Dropped modal auto close switch [WEBUI]
• Introduced hide/unhide extra features button in WebUI
• Fixed target & keybox backup restore bug on uninstall
• Updated supporter list [WEBUI]
• Denoscription will now refresh on boot instead of action
SHA256: 036bd5a6fbeed246a174a23362b53c6906dbca0aa07c43aad8fecbc0321998aaModule Features
Pre-Requirements
Preview
Support
❤117🔥18🫡9🗿9💋8🥰3🤗3🏆2😎2😘1💊1
v18-Integrity-Box-09-09-2025.zip
404.5 KB
v18 by 𝗠𝗘𝗢𝗪𝗻𝗮 💅
changelog-
• Added WebUI support for spoofing PifFork’s advanced settings
• Introduced SELinux spoofer (create /data/adb/Box-Brain/selinux to force spoofing to enforcing)
• Fixed Hide Pif detection button not working
• Updated WebUI shortcut icon
• Updated WebUI-X configuration file with latest changes
• Dropped legacy PifFork spoof shell noscript (now handled by WebUI)
• Fixed WebUI resizing issue when enabling hidden features
• Added cleanup routine to wipe leftover files on uninstallation
• Forced ksu-webui as the default WebUI engine
• Improved installation and upgrade logic for cleaner dirty flashes
• Optimized noscript execution speed and reduced unnecessary overhead
• Enhanced error handling and fail-safe mechanisms
• Added japanese translation, thanks @ot_inc
• Improved compatibility with recent Magisk and KernelSU builds
• Refined logging output for easier debugging
• Polished UI animations and theme handling
• Minor code cleanup and refactoring for long-term maintainability
SHA256: 21abc45401234fb9e3cda2a0b1cdf2bb21ab52021319f9e52364435e2afed248Module Features
Pre-Requirements
Support
2❤126👍21💋11🗿8🔥6🏆5🙈4❤🔥2😈1👨💻1👾1
v19-Integrity-Box-11-09-2025.zip
430.5 KB
v19 by 𝗠𝗘𝗢𝗪𝗻𝗮 💅
changelog-
• Added Control Center button in WebUI for easier module customization
• Spoofing toggles now remember their last configuration
• Nuked native detector from target.txt (was causing Tricky Store detection)
• Added popup function in PIF spoofer
• Module denoscription now updates on action for seamless updates
• Removed SELinux changer button from WebUI ( selinux spoofer flag cover it )
• Shipped with Pixel Tablet fingerprint
• Updated installation & uninstallation noscripts
• Fixed keybox updater error when running from WebUI
• Dropped support for kitsune mask
• Updated HMA config
• Improved overall stability and performance
• Minor bug fixes and optimizations
• Refined UI elements for a smoother experience
SHA256: b2ca3696fddf714302e12493f7e24b7857d2c3b46f08da379f31391b62d35b97Please open Telegram to view this post
VIEW IN TELEGRAM
1❤161👍17🫡13🗿9💋7👌6👾4😇3🔥2💊2😈1
v20-Integrity-Box-19-09-2025.zip
92.6 KB
v20 by 𝗠𝗘𝗢𝗪𝗻𝗮 💅
changelog-
• Added Playstore auto update disabler
• Added Spoof debug fingerprint toggle
• Added Spoof build tag toggle
• Added Spoof debug build toggle
• Added repair mode (experimental)
• Added reset Playstore toggle (enables auto update)
• Reduced module size by 80%
• Depreciated add system apps to target list function
• Depreciated enable/disable intro button
• Depreciated switch to AOSP keybox button
• Depreciated enable/disable modal timeout button
• Depreciated hidded webui function html
• Depreciated Derpfest spoofing button
• Depreciated XiaomiEU spoofing button
• Depreciated HelluvaOS spoofing button
• Depreciated PixelOS spoofing button
• Depreciated Derpfest spoofing button
• Depreciated join telegram channel button
• Depreciated module info button
• Depreciated enable inbuilt GMS spoofing button
• Depreciated banned keybox list button
• Depreciated Prop detection button
• Depreciated custom intro font
• Depreciated aosp keybox.xml
• Depreciated HMA config.json
• Depreciated module toggle mode switcher
• Depreciated background sparkles in webui
• Depreciated game
• Depreciated report shell noscript & merged into webui
• Depreciated community support shell noscript & merged into webui
• Improved flagged apps detection
• Improved module denoscription updater
• Improved webui interface
• Replaced linotte with cocon font
• Nuked webui border
• Nuked unused codes
• Merged anti debug noscript in late start service
• Shipped with Pixel 9 fingerprint
SHA256: a93538c8e63efad1cee885c25dad4d412258a144b12bc3057126341174dc9206Please open Telegram to view this post
VIEW IN TELEGRAM
❤165🔥21🫡12👍10💋10🗿9🥰3😁2👏1👻1😇1
Please open Telegram to view this post
VIEW IN TELEGRAM
❤227🔥43👍19🗿19🍾14💋9🆒6😁5👾4🫡3🏆2
Journey from 80MB to 69KB
Didn't realize how fast four months passed when Google killed the old methods and forced keybox, my Integrity Box module was unstable , experimental & incomplete, but I still released it because people needed a fix. Back then it was 80 MB, now it’s just 69 KB😁 Through this project i experimented with a lot of things, I learned about base69, OpenSSL, ROT13, hex, HTML, CSS, JS, and more
I got love, I got hate, and that what proves I’m actually doing something. Some 🥷🏿's thinks they’re “more skilled”, no doubt they are, but I’m just doing this as a hobby. It's funny enough that they're comparing them with an advocate😭
Maybe they don’t really hate me, they’re just jealous that they don’t get the same love and support I do.
I ended up destroying the businesses of many keybox sellers,😹💔 and the more haters talked about me, the more people discovered my work. Once they used it, they never looked back
You may have noticed we share a lot of common Telegram groups, but you never saw me active anywhere I used to search my name on Telegram just to see who was talking shit about me, laughing at those lifeless beings 🤣🤣 I can’t explain how funny that feeling is (telling this cuz i don't have time to this now)
Being hated by idiots is the price you pay for not being one of them😁
I don’t waste time on keyboard warriors, I let my work speak, not my mouth. No time to entertain a bunch of nuts
Thank you for the support, that’s what really matter
If you have any doubts, just ask instead of believing rumors. My DMs are always open to everyone
~ Mona
Please open Telegram to view this post
VIEW IN TELEGRAM
2❤391🔥53🫡38🗿36🏆10👀10⚡8😈6😘6🥰3🙈3
v21-Integrity-Box-22-09-2025.zip
69.5 KB
v21 by 𝗠𝗘𝗢𝗪𝗻𝗮 💅
changelog-
• Implemented notice board in module denoscription, you'll get updates of banned keyboxes, news & tips wen u run action
• Synced accent monet into sub-webui (PIF fork & Flag control)
• Updated action noscript
• Updated WebUI-X config
• Updated TS boot patch to september 2025
• Added toggle to update target list on boot
• Fixed broken translations in WEBUI
• Fixed invalid button markup by removing broken inline <a> tags with onclick
• Simplified Translation lable function by trimming unnecessary fallback branches
• Merged vending shell noscript into html
• Merged start shell noscript into html
• Merged stop shell noscript into html
• Dropped denoscription updater
• Dropped all denoscription indicators
• Dropped redundant inline <style> blocks that duplicated existing style.css rule
• Dropped custom font support from main, PIF spoofer & flag control WEBUI
• Dropped unused container and wrapper element
• Dropped redundant modals and popup structure
• Dropped duplicate or unused style rule
• Dropped old theme variables that were no longer referenced.
• Dropped noscript references to deprecated or deleted file
• Dropped unused intro•overlay blocks
• Dropped unused SCRIPT_POPUPS entries
• Dropped deprecated attributes and inline style
• Dropped translation functions that were not invoked.
• Dropped obsolete animations and keyframe
• Dropped old utility functions that served no purpose.
• Dropped unnecessary comments that added clutter.
• Dropped obsolete buttons, links, and placeholder
• Dropped unused classes for buttons, cards, and panel
• Dropped redundant spacing, margins, and layout definition
• Dropped redundant modalBackdrop reassignments inside open and closeModal function
• Streamlined folder structure by removing unused file
• Reduced code redundancy and improved maintainability.
• Improved readability by deleting experimental code.
• Ensured only actively used code remains in the project.
Note: update play integrity fork to 14.1
SHA256: 6f84d61d6c45f1903d9906c9d189c8cde9e538d7ba82aa43e1f73708ef76b4cePlease open Telegram to view this post
VIEW IN TELEGRAM
2❤182🫡20👍15🔥13🗿13💋8👌4😁3👀2😇1😎1
v22-Integrity-Box-29-09-2025.zip
66.2 KB
v22 by 𝗠𝗘𝗢𝗪𝗻𝗮 💅
changelog:
• Added option to enable/disable pif advanced settings on action from webui (module settings)
• Disabled fetch fp with advanced settings during installation
• Disabled keybox lock for seamless fetching
• Force update pushed, any previous version will no longer work
• Fixed auto update target list on boot not working
• Removed playstore auto update disabler leftover code
• Updated disable inbuilt spoofing related functions & fixed false positive webui indicator
• fixed internet check function not working during installation
• Updated keybox updater noscript
• Added option to hide TWRP detection
• Added option to fetch fingerprint on boot (internet is required)
• Added logging support for inbuilt spoofing related functions
• Fixed spoof encryption not working when reset lineage props flag was enabled & added a separate toggle to control it
• Removed boot hash fixer shell noscript & its dependency on susfs, updated inbuilt fixer
• Removed PIF inject spoof noscript as it's webui already handles setting values
• Added action delay handler for ksu & apatch users
• Added lineage prop spoofing indicator in webui
• Dropped unnecessary deletions from cleanup noscript
• Fixed module denoscription message not updating after notice update
• Nuked everything related to keybox from installation noscript, keybox updater noscript now handles it
• Dropped support for susfs
• Maybe something here & there. This is what i remember ;)
Notes:
1) For those who are using ROM's inbuilt gms spoofing, pls create/data/adb/Box-Brain/gmsfile otherwise it’ll disable in-built pixel spoofing. Users who are using the PIF module can ignore this step.
2) v22 will force PIF fork to use default settings, however if you want to use Advanced settings, simply enable the advance toggle from WEBUI & run action button
SHA256: fe74148771aecb29bb347db0a7f0b3d4509a21d50357effea778a88d3e1e7685Please open Telegram to view this post
VIEW IN TELEGRAM
1❤133🔥13👍10🫡9🗿8💋5😇2💯1🆒1
This media is not supported in your browser
VIEW IN TELEGRAM
If you’re confused about fixing abnormal boot hash when you don’t even have a boot hash, just watch this video
The issue happens because the boot hash noscript only runs when the hash file actually contains a value. If the file is empty, the noscript simply skips it, pretending everything is fine.
To run the noscript, we just need to write anything inside the hash file via WebUI & Reboot
🗿30❤16👍5🔥3💋3❤🔥1
v23-Integrity-Box-03-10-2025.zip
66.9 KB
v23 by 𝗠𝗘𝗢𝗪𝗻𝗮 💅
changelog:
• Added support to hide persist.sys.gphooks.enable & persist.sys.pphooks.enable detection using HIDE PIF DETECTION button
• Fixed internet check function not working on installation
• Deprecated migrate.sh execution (pif fork)
• Reverted changes related to advanced settings
PIF fork WebUI:
• Improved auto-apply for toggles (Apply button removed, changes apply instantly).
• Added backup/restore support for config using custom.pif.json.bak.
• Added process killing support for both Play Service & Play Store, when restartMode=gms.
• Added reboot option after saving when restartMode=reboot.
• Centralized all paths and settings into a CONFIG object.
• Toggle state now saved as JSON instead of key=value lines.
• Improved sed regex for safer JSON field replacement.
• Theme is now stored only in localStorage (no longer written to state file).
• Popup notifications now batch display for all toggles in one save.
• Removed Apply button and its functionality.
• Removed secondary button style (btn.secondary).
• Removed writing theme state into toggle_state.json.
• Removed key=value style state file output.
• Removed old popup CSS block (popup still works with shared styling).
SHA256: e7b204b90623b52d20015ff9c5f95f385cf7a6fb78f4665c33ea5ed61785f483Please open Telegram to view this post
VIEW IN TELEGRAM
❤84🔥18🗿16👍7💋4😇2
Media is too big
VIEW IN TELEGRAM
If you’re passing Basic and Device Integrity but still stuck on Strong Integrity, this tutorial will clear things up
🤭 WATCH CLOSELY
I'm using Magisk Alpha (30400), inbuilt zygisk enabled with the following modules:
TrickyStore
Shamiko
Play Integrity Fork
Integrity Box
Please open Telegram to view this post
VIEW IN TELEGRAM
1👍90❤83🗿13👀9💋7👌3👏2🎃2😇2🏆1🫡1
Yo, anyone up for WebUI translation?
I've made a bunch of changes in the recent updates. Removed unnecessary stuff and cleaned things up based on your feedback. So it’s time to retranslate the WebUI to keep everything up to date and fix the broken translations.
[There are less than 20 short lines to translate]
I've made a bunch of changes in the recent updates. Removed unnecessary stuff and cleaned things up based on your feedback. So it’s time to retranslate the WebUI to keep everything up to date and fix the broken translations.
[There are less than 20 short lines to translate]
Already done (no need to redo):
- English
- Hindi
- Urdu
- Dutch
- Tamil
- Indonesian
- Vietnamese
- French
- Russian
- Ukrainian
- Bengali
- Chinese Simplified
- Chinese Traditional
- Arabic
- Persian
- Hebrew
- Macedonian
- Spanish
- Brazilian Portuguese
- Gujrati
- Turkish
- Tagalog
- German
- Greek
- Hungarian
- Japanese
- Korean
- Thai
- Italian
- Marathi
- Romanian
- Polish
This message will be updated from time to time to avoid duplicate submissions
❤61👍15🫡5🙏4💋3🗿3
Integrity-Box-WebUI.js
1.2 KB
Open the file in any text editor, make the changes, and send it to @TempMeow when you’re done ☺️
Please open Telegram to view this post
VIEW IN TELEGRAM
👍62❤20🔥15🫡8😱3🗿3💋2