Aghisna Chest
Photo
INFORMATION📢
Regarding the initial plan to embed the bypass charging feature into the kernel and manager that I made, it turned out to be unsatisfactory because of some things that made me less suitable with it, so instead I changed the feature with the Kill Logger feature. This feature is inspired by encoreTweaks, Or maybe if you have other suggestions, please DM me and give your advice, later I will consider if it's good
Regarding the initial plan to embed the bypass charging feature into the kernel and manager that I made, it turned out to be unsatisfactory because of some things that made me less suitable with it, so instead I changed the feature with the Kill Logger feature. This feature is inspired by encoreTweaks, Or maybe if you have other suggestions, please DM me and give your advice, later I will consider if it's good
😨1
Aghisna Chest
INFORMATION📢 Regarding the initial plan to embed the bypass charging feature into the kernel and manager that I made, it turned out to be unsatisfactory because of some things that made me less suitable with it, so instead I changed the feature with the Kill…
If you are curious about what the problem is, that is a conflict with the custom thermal that I made, and bug on LN8000, because this feature is actually for PMIC or maybe those who use BQ
Forwarded from Romadoni Bae
Module2 ini strong integrity di rom Pixelage 2.8
Forwarded from marble | sweet - Updates (Zohaib)
Integrity_Box_📦-4.1(410).zip
5.6 MB
In order to get strong / device integrity you can try out these steps. For non root users there's only one way to get strong/device if we ship builds with valid keybox.
1. Turn off built-in spoof
2. Flash play integrity fix fork
3. Flash tricky store
4. Flash play integrity box v4.1
5. Reboot device and you good to go
1. Turn off built-in spoof
2. Flash play integrity fix fork
3. Flash tricky store
4. Flash play integrity box v4.1
5. Reboot device and you good to go
🔥2
Forwarded from シルネコ
SukiSU_v3.1.4_12960-release.apk
11.6 MB
## What's Changed
- manager: Optimizing Home Performance
- manager: better handle webui engine select
- manager: Refactoring kernel flash features and styles
- manager: make action execution screen have the same behavior as Magisk
- manager: Updated colors and styles
- manager: convert bitmap image to vector by hand. document: add copyright infomation. (#121)
## New Contributors
* @JiuGeFaCai made their first contribution in https://github.com/SukiSU-Ultra/SukiSU-Ultra/pull/94
* manager: Modify Module page icon by @WenHao2130 in https://github.com/SukiSU-Ultra/SukiSU-Ultra/pull/104
* manager: ksuEngine as default WebUI engine by @MiRinChan in https://github.com/SukiSU-Ultra/SukiSU-Ultra/pull/110
**Full Changelog**: https://github.com/SukiSU-Ultra/SukiSU-Ultra/compare/v3.1.3...v3.1.4
❤4
aghisna_manager_V1a.zip
736.4 KB
Changelog
Feature
How To
Suggestions and feedback on please🙏 😅
•Initial release
•Clean UI with material switch + space bg + oiiiaa
•Awesome fonts support offline too
•General system info support
•Support localStorage,Despite rebooting, changes will still be stored, until you change it again
•Add detection SU solution and Kernel config
•Add load changes from config
Feature
•themal unlock
•mode boost
How To
install as module on suki manager
Suggestions and feedback on please🙏 😅
❤6👍2
*Image is only an illustration hehe
Aghisna Manager V2
From now on, you can update it just by pressing the action button
Aghisna Manager V2
Changelog
•Fix misleading path (Config Info)
•Update shell logic
•Added Action for updating modules
•Misc improvment
From now on, you can update it just by pressing the action button
🔥3❤1
Media is too big
VIEW IN TELEGRAM
sweet, infinity 2.8, kernel x11, lN8K
The scenario, charges from 19%to 79%, according to the USB tester the time taken is 40 minutes with the health condition of the Batery reported by FKM 70%±, btw up to 20watt
What I found was, filling quickly when the device was in a state (screen off), I am not sure this is the character of LN8K or thermal behavior
Regarding the problem of reconnecting when the charger with LN8K I saw through the graphics on the teacher's batery, check the image below
The scenario, charges from 19%to 79%, according to the USB tester the time taken is 40 minutes with the health condition of the Batery reported by FKM 70%±, btw up to 20watt
What I found was, filling quickly when the device was in a state (screen off), I am not sure this is the character of LN8K or thermal behavior
Regarding the problem of reconnecting when the charger with LN8K I saw through the graphics on the teacher's batery, check the image below
👍2
Aghisna Chest
sweet, infinity 2.8, kernel x11, lN8K The scenario, charges from 19%to 79%, according to the USB tester the time taken is 40 minutes with the health condition of the Batery reported by FKM 70%±, btw up to 20watt What I found was, filling quickly when the…
Look at the picture and the mark
Red color: When I connect the device with a charger using an original cable, I think I want to change the cable to make it more prefer when doing a test and may be a picture if the quality of the cable affects
green color: here I use a cable with a length of 25 cm Sony Original brand, you can see the graph down and rise, until finally I pulled out at 79%
So once again, what you see when when the graphics go down I turn on the device screen, you can see it in the USB Tester video above, I did not find a problem of termination that really like you pulled and replaced the charger, which was only charging up and down that was used as a device used (screen on)
*The screenshot was taken after the device had been unplugged from the charger
Red color: When I connect the device with a charger using an original cable, I think I want to change the cable to make it more prefer when doing a test and may be a picture if the quality of the cable affects
green color: here I use a cable with a length of 25 cm Sony Original brand, you can see the graph down and rise, until finally I pulled out at 79%
So once again, what you see when when the graphics go down I turn on the device screen, you can see it in the USB Tester video above, I did not find a problem of termination that really like you pulled and replaced the charger, which was only charging up and down that was used as a device used (screen on)
*The screenshot was taken after the device had been unplugged from the charger
👍3❤1