GPU Undervolt, Konabess
So i've found out something that probably not everyone already know about. As for now, GPU undervolt done by looking at this 2 aspects; no artifacts, no freezing. Those 2 things were the concern of going to the most lowest voltage possible to run.
Running on the lowest voltage with no artifacts or freezing might be a good thing. But there's something we are not aware whole this time. Microstutters.
Running too low voltage might cause device to have microstutters due to sudden spike of GPU power demand.
Let's take example of it :
- 150mhz @1 microvolt
- 205mhz @1 microvolt
- 330mhz @1 microvolt
This might sounds good since it run with no issues with the lowest voltage, but it cause microstutters. Don't run anything lower than RETENTION (@16), since it also might fasten the GPU aging.
So, i made a simple formula to have "safe" undervolt.
example:
683mhz @225, it will be 683mhz @241
Lowest threshold means the safest microvolts to run without having issues like artifacts or freezing, and then added by 16.
So i've found out something that probably not everyone already know about. As for now, GPU undervolt done by looking at this 2 aspects; no artifacts, no freezing. Those 2 things were the concern of going to the most lowest voltage possible to run.
Running on the lowest voltage with no artifacts or freezing might be a good thing. But there's something we are not aware whole this time. Microstutters.
Running too low voltage might cause device to have microstutters due to sudden spike of GPU power demand.
Let's take example of it :
- 150mhz @1 microvolt
- 205mhz @1 microvolt
- 330mhz @1 microvolt
This might sounds good since it run with no issues with the lowest voltage, but it cause microstutters. Don't run anything lower than RETENTION (@16), since it also might fasten the GPU aging.
So, i made a simple formula to have "safe" undervolt.
@lowest_threshold + @16example:
683mhz @225, it will be 683mhz @241
Lowest threshold means the safest microvolts to run without having issues like artifacts or freezing, and then added by 16.
Good December Everyone,
Development of the kernel is now paused for a while !
The reason is because i don't have any device to compile my sources anymore. I used to compile with my shared laptop, but now the keyboard is dead due to water damage (my brother spilled water on it).
So kindly wait until i got my own laptop, setting it up again with linux distro, etc etc and continues working on it. Thanks !
Development of the kernel is now paused for a while !
The reason is because i don't have any device to compile my sources anymore. I used to compile with my shared laptop, but now the keyboard is dead due to water damage (my brother spilled water on it).
So kindly wait until i got my own laptop, setting it up again with linux distro, etc etc and continues working on it. Thanks !
If you guys bought a laptop with a locked domain (enterprise/organization/company laptop), Windows setup locks your laptop by asking for the company email, try these method for Windows 10 to UNLOCK and SKIP the OOBE/Windows Setup :
1. At first fresh boot of Windows setup, press
2. Open regedit
3. Go to HKEY_LOCAL_MACHINE/SYSTEM/Setup
4. Remove the value of
5. Set value of
6. Go to HKEY_LOCAL_MACHINE/Software/Microsoft/Windows/CurrentVersion/Policies/System
7. Set value of
8. Open command prompt
9. type
10. type
11. Restart, you will direct enter Windows home screen, check for drivers update and etc.
Enjoy your hijacked-stolen company laptop.
1. At first fresh boot of Windows setup, press
CTRL+Shift+F3 (to enter audit mode)2. Open regedit
3. Go to HKEY_LOCAL_MACHINE/SYSTEM/Setup
4. Remove the value of
CmdLine5. Set value of
OOBEInProgress, SetupPhase, SetupType to 06. Go to HKEY_LOCAL_MACHINE/Software/Microsoft/Windows/CurrentVersion/Policies/System
7. Set value of
EnableCursorSuppresion to 08. Open command prompt
9. type
net user /add user10. type
net localgroup /add administrators user11. Restart, you will direct enter Windows home screen, check for drivers update and etc.
Enjoy your hijacked-stolen company laptop.
#E404 #Linux #Kernel
#Munch #Alioth #Apollo
[R11] 2025/04/11 - Stable
⚪ Channel | Discussion
⚪ Download & Changelogs
⚪ Installation Guide
--> Kernel Source
--> Kernel CI Builds
Contributors :
--> EmanuelCN0 for base & help
--> Community, members and participants
Notes :
--> Supports AOSP/MIUI/HyperOS
--> ALWAYS READ GUIDES AND CHANGELOGS.
#Munch #Alioth #Apollo
[R11] 2025/04/11 - Stable
⚪ Channel | Discussion
⚪ Download & Changelogs
⚪ Installation Guide
--> Kernel Source
--> Kernel CI Builds
Contributors :
--> EmanuelCN0 for base & help
--> Community, members and participants
Notes :
--> Supports AOSP/MIUI/HyperOS
--> ALWAYS READ GUIDES AND CHANGELOGS.
#E404 #Linux #Kernel
#Munch #Alioth #Apollo
[R12] 2025/07/07 - Stable
[×] Channel
[×] Playground
[×] Download & Changelogs
[×] Kernel Source
[×] Kernel CI Builds
Contributors :
- EmanuelCN0 for base & help
- Community, members and participants
#Munch #Alioth #Apollo
[R12] 2025/07/07 - Stable
[×] Channel
[×] Playground
[×] Download & Changelogs
[×] Kernel Source
[×] Kernel CI Builds
Contributors :
- EmanuelCN0 for base & help
- Community, members and participants
R13 Update is buzzing nearwhere !
Listed changes :
- Source Rebase and Cleanup
- KSU-Next 1.0.9 with other manager support
- Support for Poco F2&Pro (LMI)
- Support for PORT ROM by Dandaa
- More E404 Features
- Backported stuff
- And other major changes !
Listed changes :
- Source Rebase and Cleanup
- KSU-Next 1.0.9 with other manager support
- Support for Poco F2&Pro (LMI)
- Support for PORT ROM by Dandaa
- More E404 Features
- Backported stuff
- And other major changes !
#E404 #Linux #Kernel
#Munch #Alioth #Apollo #LMI
#AOSP #CLO #MIUI #HyperOS #OPLUSPort
[R13] 2025/09/19 - Stable
[×] Github Page
[×] Download & Changelogs
[×] Kernel Install Guide
[×] Channel
[×] Playground
[×] Weekly Builds
[×] Kernel Source
Notes :
- A16 BPF ROMs (e.g HyperOS2) is not supported !
- AOSP/MIUI/HyperOS is supported !
- Dandaa's PORT is supported !
Contributors :
- EmanuelCN0
- Community contributors
- All testers & members
#Munch #Alioth #Apollo #LMI
#AOSP #CLO #MIUI #HyperOS #OPLUSPort
[R13] 2025/09/19 - Stable
[×] Github Page
[×] Download & Changelogs
[×] Kernel Install Guide
[×] Channel
[×] Playground
[×] Weekly Builds
[×] Kernel Source
Notes :
- A16 BPF ROMs (e.g HyperOS2) is not supported !
- AOSP/MIUI/HyperOS is supported !
- Dandaa's PORT is supported !
Contributors :
- EmanuelCN0
- Community contributors
- All testers & members
Project 113 | Updates
#E404 #Linux #Kernel #Munch #Alioth #Apollo #LMI #AOSP #CLO #MIUI #HyperOS #OPLUSPort [R13] 2025/09/19 - Stable [×] Github Page [×] Download & Changelogs [×] Kernel Install Guide [×] Channel [×] Playground [×] Weekly Builds [×] Kernel Source Notes : …
Good Sunday Everyone !
I have pushed another update for this version.
Changes including :
- Fixed potential selinux missmatch in Miui/HyperOS ROMs
- Fixed i/o performance regressions
- Added "easter egg" changes for e404 attr
- Other small improvements
Users can redownload on the same github page, and reflash the kernel. Thank you !
I have pushed another update for this version.
Changes including :
- Fixed potential selinux missmatch in Miui/HyperOS ROMs
- Fixed i/o performance regressions
- Added "easter egg" changes for e404 attr
- Other small improvements
Users can redownload on the same github page, and reflash the kernel. Thank you !