Gas flow under ultrahigh vacuum (UHV) conditions can be challenging to model. This post introduces a Monte Carlo simulation of a simplified turbomolecular pump stage, consisting of a single rotating ring of blades.
+PDF 👇
@Solidworks2019
+PDF 👇
@Solidworks2019
1) Which choice is NOT a fillet type in SOLIDWORKS?
Anonymous Quiz
21%
Constant size
15%
Variable size
24%
Face
40%
Angled
2)Your sketch is not extruding correctly. It does not seem to be a properly closed contour, although from a simple visual inspection, it looks to be fully closed. You think perhaps there are some very small gaps in your contour that are causing the issue. What tool can you use to find these small gaps?
SolidWorks
2)Your sketch is not extruding correctly. It does not seem to be a properly closed contour, although from a simple visual inspection, it looks to be fully closed. You think perhaps there are some very small gaps in your contour that are causing the issue.…
Select correct Answer of Q2 : 👇🏻
Anonymous Quiz
19%
Rebuild
16%
Quick Snaps
39%
Repair Sketch
26%
Show Error
3) You want to make two circles have the same center point within a SOLIDWORKS sketch. How can you do this?
Anonymous Quiz
5%
Add a tangent relation between the circles
82%
Add a concentric relation between the circles
6%
Add a horizontal relation between the circles
7%
Add an equal relation between the circles
4) You want to show a list of the raw materials, subassemblies, intermediate assemblies, subcomponents, and parts, and the quantities of each, needed to manufacture an end product. What would be useful to accomplish this?
Anonymous Quiz
78%
bill of material
12%
isometric view
9%
exploded view
1%
hole list
4) Freezing a portion of a model can be used if you work with complex models with many features. Why??
Anonymous Quiz
19%
Freezing the features helps to show only the critical features of the model
23%
Helps to show the internal features of the model
47%
Helps to reduce the rebuild time and prevent unintentional changes to the model
11%
Helps to show the external features of the model
👍2
5) You have designed a plastic part that you want to split and save in two separate unique parts. You use the Split tool to split the part in half and create the two bodies. What do you do next?
Anonymous Quiz
26%
Navigate to the Solid Bodies folder, right-click the body name, and select Isolate and save .
18%
Within the Split tool, select Consume Bodies.
22%
Within the Split tool, select Save as New Files.
34%
Within the Split tool, click File, double-click the body name, type a name for the new part, Save.
👍1
6) What is required to create a new 2D sketch?
Anonymous Quiz
16%
any existing geometry
15%
any existing plane or curved face
63%
any existing plane or planar face
6%
any planar or curved surface
7) You want to focus on a single component within your assembly and hide all the rest. How can you do this?
Anonymous Quiz
18%
Right-click the component you want to focus on and select Change Transparency
16%
Right-click the component you want to focus on and select Hide
56%
Right-click the component you want to focus on and select Isolate
10%
Right-click the component you want to focus on and select Suppress
❤1😁1
8) Which reference geometry is NOT available in SOLIDWORKS?
Anonymous Quiz
75%
sphere
7%
plane
12%
point
6%
axis
9) In the image below, which are the parents and children of the Vertical Boss Feature?
Anonymous Quiz
38%
The parent is Base Feature; the children are Slot Cutout, Sketch3, CBORE Hole, and Fillet2
19%
The parent is Vertical Boss; the childre are Base Feature, Slot Cutout, Sketch3 and Fillet2
34%
The parent is Base Feature; the children are Vertical Boss, Slot Cutout, Sketch3 and CBORE Holde
9%
The parents are CBORE Hole and Base Feature; the children are Slot Cutout, Sketch3, , and Fillet2
10) In the image belew, which parts are fixed?
Anonymous Quiz
10%
Link 1
8%
Link 3
36%
Link 5
46%
Base
Hello Solidworks Community.
We have a New Challenge for you.😎 (Intermediate)
📌Calculate The Correct Mass and leave your answers in the comments below 👇
@Solidworks2019
We have a New Challenge for you.😎 (Intermediate)
📌Calculate The Correct Mass and leave your answers in the comments below 👇
@Solidworks2019
👍3