The Coriolis force or the Coriolis effect is a quasi-force that causes moving objects to deviate from a straight line as seen by an observer inside a rotating frame of reference.
The effects of this force can be clearly seen in determining the direction of the currents of the weather fronts of the planets. This effect was discovered by French engineer Gaspar Gustave Coriolis.
@Solidworks2019

(Machining Design Guidelines )
✅Turning Guidelines

📌Blind Hole Relief
Provide tool relief for the bottoms of blind bored holes.
Tool relief at the end of a bored hole will simplify the operation of honing, boring, reaming, and grinding and reduce costs. The minimum amount of relief is expressed as a percent of the diameter of the pre-bored.
It is recommended that relief at the end of bored hole should be greater than or equal to 3% of the diameter of bored hole.

@Solidworks2019

(Machining Design Guidelines )
✅Turning Guidelines

📌Minimum Internal Corner Radius
It is recommended to avoid sharp internal corners and provide large inside radius so that a tool with large nose radius can enter easily. A tool with large radius is less prone to breakage. A turn-down surface at right angles to an un-machined (cast) surface might lead to burrs. The minimum radius on internal corners of a turned part determines the cutting inserts that can be used.
It is always recommended to use cutting inserts with larger radii.

@Solidworks2019

(Machining Design Guidelines )

✅Turning Guidelines
📌Outer Diameter Profile Relief

📋Profile relief on the outer diameter of a turned part helps in smooth turn-machining of part.

📋The turned contour should allow easy tracing with a minimum number of changes of stylus and cutting tool. Grooves with parallel or steep sidewalls are not feasible in one operation.

📋Contours inclined upto an angle of 58° from the axis of the part are feasible for a cutting tool (and stylus). Following image shows feasible contours when they are perpendicular to the axis.

@Solidworks2019

(Machining Design Guidelines )

✅Turning Guidelines
📌Symmetrical Axial Slots

The width of axial slots and keyways on turned parts should be symmetrical about the turn axis. If width of axial slots and keyways is not symmetrical about the turn axis, then the part will face problems while coupling with other turn parts.

❗️It is recommended to design axial slots and keyways such that they are symmetrical about the turn axis. This guideline identifies whether the width of axial slots and keyways is symmetrical about the turn axis or not, a condition which is likely a result of an error during modeling.

@Solidworks2019

Statical test for metals and none metals
@Solidworks2019

آزمایشات استاتیکی برخی از فلزات و غیر فلزات
@Solidworks2019

میدانید مهندسی یعنی چی ؟؟؟؟
@Solidworks2019

Types of mechanical mechanisms at a glance.
@Solidworks2019

ده ها مکانیزم در یک مجموعه نمایشی
@Solidworks2019

Explaining the topic of plane stress in simple language and pointing out its applications
@Solidworks2019

تشریح مبحث تنش صفحه‌ای plane stress به زبانی ساده و اشاره به کاربردهای آن

@Solidworks2019

The air purification tower built by the Dutch company Roosegaard, which is actually a vacuum cleaner for sucking polluted air, purifies about 30 cubic kilometers of air every hour by consuming 1 kilowatt of green electrical energy. This tower can be used in different areas such as parks or places with high air pollution
@Solidworks2019

برج تصفیه کننده هوای ساخته شده توسط کمپانی هلندی Roosegaard که در واقع یک جاروبرقی برای مکش هوای آلوده بوده و در هر ساعت حدود ۳۰ کیلومتر مکعب هوا را با مصرف ۱ کیلووات انرژی الکتریکی سبز، تصفیه میکند. از این برج در مناطق مختلفی مانند پارک‌ها و یا مکان‌هایی با آلودگی هوای بالا میتوان استفاده کرد.

@Solidworks2019

An animation of how the car tire packing machine (stretch ring screw) works and showing its mechanism

@Solidworks2019

مکانیزم یک ماشین استرچ پیچ جهت کاوربندی لاستیک
@Solidworks2019

انیمیشن مربوط به اصل برنولی در مکانیک سیالات
@Solidworks2019

Educational animation of Bernoulli's principle in fluid mechanics and reference to the important equations of this topic
@Solidworks2019

مجموعه قطعات یک موتور احتراق داخلی چهار سیلندر بصورت دمونتاژ انفجاری در محیط واقعی
@Solidworks2019