🆕 After Life Project 7.3 | Honest | Official
Android 14 (U)
📅 Updated: Nov. 28, 2024
🧑🔧 Maintainer: @Romeo_Delta_Whiskey
📥 Download [1.34GB]
❇️ Source changelog
▪️Screenshots
▪️Support
💸 Donate
🆑 Device changelog >
• Sync With 4.19.318 TheOneMemory Kernel
• Build AfterEcho™
• Signed build
📝Notes >
• Non-FBE, LV, enforcing, 4.19 kernel, kernelSU supported & singed build
• Pie firmware 063 or 087 recommend
• Use this TWRP for flashing this build
• Nikgapps core/basic recommend
• Read this before flashing
There's nothing special about my rom, you can skip if you don't like, or you can taste it.
Follow @ZFMaxProM1Updates
Join @ZFMaxProM1Support
#AfterLifeProject #Honest #Android14 #X00TD #NeverDie
Android 14 (U)
📅 Updated: Nov. 28, 2024
🧑🔧 Maintainer: @Romeo_Delta_Whiskey
📥 Download [1.34GB]
❇️ Source changelog
▪️Screenshots
▪️Support
💸 Donate
🆑 Device changelog >
• Sync With 4.19.318 TheOneMemory Kernel
• Build AfterEcho™
• Signed build
📝Notes >
• Non-FBE, LV, enforcing, 4.19 kernel, kernelSU supported & singed build
• Pie firmware 063 or 087 recommend
• Use this TWRP for flashing this build
• Nikgapps core/basic recommend
• Read this before flashing
There's nothing special about my rom, you can skip if you don't like, or you can taste it.
Follow @ZFMaxProM1Updates
Join @ZFMaxProM1Support
#AfterLifeProject #Honest #Android14 #X00TD #NeverDie
👍9🔥7❤4🤗2
This media is not supported in your browser
VIEW IN TELEGRAM
🆕 Resurrection Remix 8.7.3 | Oppenheimer | Unofficial
Android 10 (Q)
📆 Updated: Dec 05 , 2024
🧑🔧 Maintainer: @queenserenade
⬇️ Download [947.01MB]
▪️Support
💰Donate
🆑 Changelog >
• Disable surface flinger inefficient at performing a blur
• Improve a little bit battery backup
• Downgrade NFC interface
• Merge topic:Qasb2024-10
• November security patch
• Pin standard SystemUI
📝 Notes >
• Non-FBE, NLV, enforcing & 4.4 kernel based build
• KernelSU supported in default kernel
• Signed build (clean flash recommended)
• Pie firmware 063 or 087 recommended
• Nikgapps core/basic recommended
• Safetynet pass by default
© Thanks To >
• @Sumit_Kumar899 for testing
• @Ihklknz for banner
Follow @ZFMaxProM1Updates
Join @ZFMaxProM1Support
#RROS #Unofficial #AndroidQ #X00TD
Android 10 (Q)
📆 Updated: Dec 05 , 2024
🧑🔧 Maintainer: @queenserenade
⬇️ Download [947.01MB]
▪️Support
💰Donate
🆑 Changelog >
• Disable surface flinger inefficient at performing a blur
• Improve a little bit battery backup
• Downgrade NFC interface
• Merge topic:Qasb2024-10
• November security patch
• Pin standard SystemUI
📝 Notes >
• Non-FBE, NLV, enforcing & 4.4 kernel based build
• KernelSU supported in default kernel
• Signed build (clean flash recommended)
• Pie firmware 063 or 087 recommended
• Nikgapps core/basic recommended
• Safetynet pass by default
© Thanks To >
• @Sumit_Kumar899 for testing
• @Ihklknz for banner
Follow @ZFMaxProM1Updates
Join @ZFMaxProM1Support
#RROS #Unofficial #AndroidQ #X00TD
❤5👍2👏2
This media is not supported in your browser
VIEW IN TELEGRAM
🆕 Project Matrix 10.10.0 | Unofficial | EOL
Android 14 (U)
📅 Updated: Dec. 20, 2024
🧑🔧 Maintainer: @queenserenade
📥 Download [1.23GB]
❇️ Source changelog
▪️Screenshots
▪️Support
💰Donate
🆑 Device changelog >
• Disable handling audio directing changes between call states
• mm-video-v4l2: add extradata support in encoder
• Enable all available vibration intensity levels
• Powerhint: optimize for efficiency
• Update power profile
• Add new AID
📝 Notes >
• Non-FBE, LV, enforcing & 4.19 kernel based build
• Pie firmware 063 or 087 recommended
• Use this TWRP for flashing this ROM
• Nikgapps core/basic recommended
• KernelSU manager
Follow @ZFMaxProM1Updates
Join @ZFMaxProM1Support
#ProjectMatrix #Unofficial #Android14 #X00TD
Android 14 (U)
📅 Updated: Dec. 20, 2024
🧑🔧 Maintainer: @queenserenade
📥 Download [1.23GB]
❇️ Source changelog
▪️Screenshots
▪️Support
💰Donate
🆑 Device changelog >
• Disable handling audio directing changes between call states
• mm-video-v4l2: add extradata support in encoder
• Enable all available vibration intensity levels
• Powerhint: optimize for efficiency
• Update power profile
• Add new AID
📝 Notes >
• Non-FBE, LV, enforcing & 4.19 kernel based build
• Pie firmware 063 or 087 recommended
• Use this TWRP for flashing this ROM
• Nikgapps core/basic recommended
• KernelSU manager
Follow @ZFMaxProM1Updates
Join @ZFMaxProM1Support
#ProjectMatrix #Unofficial #Android14 #X00TD
🔥4❤1
This media is not supported in your browser
VIEW IN TELEGRAM
🆕 CrDroid 11 | Unofficial
Android 15
📅 Updated: Dec. 23, 2024
🧑🔧 Maintainer: @SonicBSV
⬇️ Download [1.27GB]
▪️Support
💸 Donate
🆑 Changelog >
• Fixed media codec bugs (camera recording in 4k resolution, screen recording with hevc codec)
• Fixed NFC mfc (Mifare) & updated configs
• 4.19.320 Ratibor-v2 as default kernel
• Up to release 11.0 version
• Fixed proximity sensor
• SELinux fixes
📝 Notes >
• If need to turn off kernelSU then change the value in the cmdline kernel from
• Non-FBE, LV, enforcing, 4.19 kernel based & kernelSU supported build
• Pie firmware 063 or 087 recommended
• Use this TWRP recovery for 4.19 builds
• Nikgapps core/basic recommended
• Clean flash mandatory
• Web Cam not working
Follow @ZFMaxProM1Updates
Join @ZFMaxProM1Support
#CrDroid #Unofficial #Android15 #X00TD
Android 15
📅 Updated: Dec. 23, 2024
🧑🔧 Maintainer: @SonicBSV
⬇️ Download [1.27GB]
▪️Support
💸 Donate
🆑 Changelog >
• Fixed media codec bugs (camera recording in 4k resolution, screen recording with hevc codec)
• Fixed NFC mfc (Mifare) & updated configs
• 4.19.320 Ratibor-v2 as default kernel
• Up to release 11.0 version
• Fixed proximity sensor
• SELinux fixes
📝 Notes >
• If need to turn off kernelSU then change the value in the cmdline kernel from
kernelsu.enabled=1 to kernelsu.enabled=0• Non-FBE, LV, enforcing, 4.19 kernel based & kernelSU supported build
• Pie firmware 063 or 087 recommended
• Use this TWRP recovery for 4.19 builds
• Nikgapps core/basic recommended
• Clean flash mandatory
• Web Cam not working
Follow @ZFMaxProM1Updates
Join @ZFMaxProM1Support
#CrDroid #Unofficial #Android15 #X00TD
🔥6👍2⚡1❤1😱1
This media is not supported in your browser
VIEW IN TELEGRAM
🆕 CrDroid 7.48 | Unofficial
Android 11 (R)
📅 Updated: Dec. 11, 2024
🧑🔧 Maintainer: @SonicBSV
⬇️ Download [826.30MB]
▪️Support
💸 Donate
🆑 Changelog >
• Update & improve system stability
📝 Notes >
• If need to turn off kernelSU then change the value in the cmdline kernel from
• Non-FBE, LV, enforcing, 4.4 kernel based & kernelSU supported build
• Pie firmware 063 or 087 recommended
• Use this TWRP recovery for 4.4 builds
• Nikgapps core/basic recommended
Follow @ZFMaxProM1Updates
Join @ZFMaxProM1Support
#CrDroid #Unofficial #Android11 #X00TD
Android 11 (R)
📅 Updated: Dec. 11, 2024
🧑🔧 Maintainer: @SonicBSV
⬇️ Download [826.30MB]
▪️Support
💸 Donate
🆑 Changelog >
• Update & improve system stability
📝 Notes >
• If need to turn off kernelSU then change the value in the cmdline kernel from
kernelsu.enabled=1 to kernelsu.enabled=0• Non-FBE, LV, enforcing, 4.4 kernel based & kernelSU supported build
• Pie firmware 063 or 087 recommended
• Use this TWRP recovery for 4.4 builds
• Nikgapps core/basic recommended
Follow @ZFMaxProM1Updates
Join @ZFMaxProM1Support
#CrDroid #Unofficial #Android11 #X00TD
🔥2❤1👍1👏1
🆕 CrDroid 9.20 | Unofficial
Android 13
📅 Updated: Nov. 22, 2024
🧑🔧 Maintainer: @SonicBSV
⬇️ Download [1.05GB]
▪️Support
💸 Donate
🆑 Changelog >
• Some kernel optimizations
• Rework device tree
• Drop zenparts
📝 Notes >
• If need to turn off kernelSU then change the value in the cmdline kernel from
• Non-FBE, LV, enforcing, 4.19 kernel based & kernelSU supported build
• Pie firmware 063 or 087 recommended
• Use this TWRP recovery for 4.19 builds
• Nikgapps core/basic recommended
• Doesn't read nfc tags (mifare)
• Clean flash mandatory
Follow @ZFMaxProM1Updates
Join @ZFMaxProM1Support
#CrDroid #Unofficial #Android13 #X00TD
Android 13
📅 Updated: Nov. 22, 2024
🧑🔧 Maintainer: @SonicBSV
⬇️ Download [1.05GB]
▪️Support
💸 Donate
🆑 Changelog >
• Some kernel optimizations
• Rework device tree
• Drop zenparts
📝 Notes >
• If need to turn off kernelSU then change the value in the cmdline kernel from
kernelsu.enabled=1 to kernelsu.enabled=0• Non-FBE, LV, enforcing, 4.19 kernel based & kernelSU supported build
• Pie firmware 063 or 087 recommended
• Use this TWRP recovery for 4.19 builds
• Nikgapps core/basic recommended
• Doesn't read nfc tags (mifare)
• Clean flash mandatory
Follow @ZFMaxProM1Updates
Join @ZFMaxProM1Support
#CrDroid #Unofficial #Android13 #X00TD
👍5❤2
🆕 CrDroid 10.11 | Unofficial
Android 14
📅 Updated: Dec. 25, 2024
🧑🔧 Maintainer: @SonicBSV
⬇️ Download [1.22GB]
▪️Support
💸 Donate
🆑 Changelog >
• Fixed media codec bugs (camera recording in 4k resolution & screen recording with hevc codec)
• Fixed NFC mfc (Mifare) & updated configs.
• Ratibor-v2 4.19.320 as default kernel
• Merged December security patch
• Rework device tree & vendor
• Up to version 10.11
• SELinux fixes
📝 Notes >
• If need to turn off kernelSU then change the value in the cmdline kernel from
• Non-FBE, LV, enforcing, 4.19 kernel based & kernelSU supported build
• Pie firmware 063 or 087 recommended
• Use this TWRP recovery for 4.19 builds
• Nikgapps core/basic recommended
• Doesn't read nfc tags (mifare)
• Clean flash mandatory
Follow @ZFMaxProM1Updates
Join @ZFMaxProM1Support
#CrDroid #Unofficial #Android14 #X00TD
Android 14
📅 Updated: Dec. 25, 2024
🧑🔧 Maintainer: @SonicBSV
⬇️ Download [1.22GB]
▪️Support
💸 Donate
🆑 Changelog >
• Fixed media codec bugs (camera recording in 4k resolution & screen recording with hevc codec)
• Fixed NFC mfc (Mifare) & updated configs.
• Ratibor-v2 4.19.320 as default kernel
• Merged December security patch
• Rework device tree & vendor
• Up to version 10.11
• SELinux fixes
📝 Notes >
• If need to turn off kernelSU then change the value in the cmdline kernel from
kernelsu.enabled=1 to kernelsu.enabled=0• Non-FBE, LV, enforcing, 4.19 kernel based & kernelSU supported build
• Pie firmware 063 or 087 recommended
• Use this TWRP recovery for 4.19 builds
• Nikgapps core/basic recommended
• Doesn't read nfc tags (mifare)
• Clean flash mandatory
Follow @ZFMaxProM1Updates
Join @ZFMaxProM1Support
#CrDroid #Unofficial #Android14 #X00TD
👍9❤1🤔1
Forwarded from ዞimanshu Raj
Anyone willing to test Rising OS a15 ?
❤1🔥1🎉1
Wish you Merry Christmas and happy festive season. Treasure the present and create a beautiful tomorrow! Seasons Greetings ! 🎁🎄🎅❄️
Follow @ZFMaxProM1Updates
Join @ZFMaxProM1Support
#MerryChristmas #ChristmasEve
Follow @ZFMaxProM1Updates
Join @ZFMaxProM1Support
#MerryChristmas #ChristmasEve
🎉4❤3🥰1
🆕 After Life Project 7.4 | Loyal | Official
Android 14 (U)
📅 Updated: Dec. 25, 2024
🧑🔧 Maintainer: @Romeo_Delta_Whiskey
📥 Download [1.35GB]
❇️ Source changelog
▪️Screenshots
▪️Support
💸 Donate
🆑 Device changelog >
• Disable handling audio directing changes between call states
• mm-video-v4l2: add extradata support in encoder
• Enable all available vibration intensity levels
• Powerhint: optimize for efficiency
• Update power profile
• Add new AID
📝Notes >
• Non-FBE, LV, enforcing, 4.19 kernel, kernelSU supported & singed build
• Pie firmware 063 or 087 recommend
• Use this TWRP for flashing this build
• Nikgapps core/basic recommend
• KernelSU manager
There's nothing special about my rom, you can skip if you don't like, or you can taste it. Hope you all have a happy life
Thank you.
Follow @ZFMaxProM1Updates
Join @ZFMaxProM1Support
#AfterLifeProject #Loyal #Android14 #X00TD #NeverDie
Android 14 (U)
📅 Updated: Dec. 25, 2024
🧑🔧 Maintainer: @Romeo_Delta_Whiskey
📥 Download [1.35GB]
❇️ Source changelog
▪️Screenshots
▪️Support
💸 Donate
🆑 Device changelog >
• Disable handling audio directing changes between call states
• mm-video-v4l2: add extradata support in encoder
• Enable all available vibration intensity levels
• Powerhint: optimize for efficiency
• Update power profile
• Add new AID
📝Notes >
• Non-FBE, LV, enforcing, 4.19 kernel, kernelSU supported & singed build
• Pie firmware 063 or 087 recommend
• Use this TWRP for flashing this build
• Nikgapps core/basic recommend
• KernelSU manager
There's nothing special about my rom, you can skip if you don't like, or you can taste it. Hope you all have a happy life
Thank you.
Follow @ZFMaxProM1Updates
Join @ZFMaxProM1Support
#AfterLifeProject #Loyal #Android14 #X00TD #NeverDie
👍13❤3
🆕 Rising OS 6.0 | Ascension | Stable | Unofficial
Android 15
📅 Updated: Dec. 25, 2024
🧑🔧 Maintainer: @hraj9258
📥 Download [1.86GB]
❇️ Source changelog
▪️Screenshots
▪️Support
🆑 Device changelog >
• Initial Android 15 build
• Circle to search is working
📝 Notes >
• Non-FBE, LV, enforcing, 4.19 kernel & kernelSU supported build
• Pie firmware 063 or 087 recommend
• Latest official TWRP recommended
• Coregapps included
© Thanks To >
@SKetUl for trees
Follow @ZFMaxProM1Updates
Join @ZFMaxProM1Support
#RisingInYourArea #Ascension #Unofficial #Stable #Android15 #X00TD
Android 15
📅 Updated: Dec. 25, 2024
🧑🔧 Maintainer: @hraj9258
📥 Download [1.86GB]
❇️ Source changelog
▪️Screenshots
▪️Support
🆑 Device changelog >
• Initial Android 15 build
• Circle to search is working
📝 Notes >
• Non-FBE, LV, enforcing, 4.19 kernel & kernelSU supported build
• Pie firmware 063 or 087 recommend
• Latest official TWRP recommended
• Coregapps included
© Thanks To >
@SKetUl for trees
Follow @ZFMaxProM1Updates
Join @ZFMaxProM1Support
#RisingInYourArea #Ascension #Unofficial #Stable #Android15 #X00TD
👍8🔥7❤2
Take a bow, 2024 – for every high and low, every lesson learned, and every moment lived. Here's to stepping into 2025 with open hearts and new dreams !
Follow @ZFMaxProM1Updates
Join @ZFMaxProM1Support
#NewYearEve #HappyNewYear #Hello2025
Follow @ZFMaxProM1Updates
Join @ZFMaxProM1Support
#NewYearEve #HappyNewYear #Hello2025
👍8❤4
This media is not supported in your browser
VIEW IN TELEGRAM