Laya BatteryMonitor Module
Target device: Universal (MTK/QCOM/UNISOC)
By: @Laynsb
Version: v1.7-stable-250710-216c9224

just flash and enjoy the coldness 🤑

Laya BatteryMonitor Module
Target device: Universal (MTK/QCOM/UNISOC)
By: @Laynsb
Version: V1.8-stable-250715-1155a5ef

Changelog:

• Added battmon helper to help battmon write governor properly if permission is 0444
• Attempt 1 fix crash with encore tweaks (this shi causing scaling gov perm 0444)
• Improved log accuracy
• Optimized in-memory map logic
• Refine code for better stability and lower overhead
• Remove static load defaults function to reduce overhead
• Dynamically saves the current frequencies & governor right before screen locked (alternative of static load defaults)
• [code] Restore cpu freqs/governor completely if debug.laya.battmon_enabled value was 0
• Code improvement & misc optimizations

just flash and enjoy the coldness 🤑

Laya BatteryMonitor Module
Target device: Universal (MTK/QCOM/UNISOC)
By: @Laynsb
Version: V1.8.1-stable-250718-07bd6050

Changelog:

• Increases loop time to 5s to reduce overhead (also to reduce constantly checking debug.laya.battmon_enabled prop)
• [synced_code_0e4cfa2f] Fix schedutil or other folder detected as cpu policy
• [synced_code_0e4cfa2f] Sleep 30s after sys.boot_complete=1 for stability reason
• Sync some code from v1.8-stable-250715-0e4cfa2f

What's the purpose of this module? Click here

Flash and enjoy the coldness 🤑
Overhead?🤔 Zero overhead, ultra lightweight & optimized asf 🤑

#LaynsbProject
Introduced Laya BatteryMonitor for ROM developers
Link: https://github.com/Laynsb/Laya-BatteryMonitor

What's the purpose of this monitor?

• Automatically reduces CPU frequency when the screen is off, saving power without impacting performance when the device is in use.
• Switches to powersave governor in screen-off mode for better battery preservation.
• Lower temperature during standby

Copyright (c) 2025 Laynsb

This software is distributed in binary form only (the “Binary”).
By using, copying, embedding, or distributing this Binary, you agree
to the following terms: LICENSE

Soon battery monitor toggle integration for XOS15 port rom, etc

Laya BatteryMonitor Module
Target device: Universal
By: @Laynsb

Download: Click Here
Version: V2.0-stable-250728-5cac2c03

Changelog:
• Improved inotify mechanism
• Significantly Improved compatibility across all devices (Tested on exynos)
• Added Inotify Overflow detection
• Added more logging if inotify shows an abnormalities
• Dynamically change inotify buffer if inotify overflow was detected
• Reduce polling loop for property to 4s
• Sleep 2s and retries if inotify error
• Avoid Unused Cow<'static, str>
• Reduced potential minor memory deduplication for screen state and governor string
• Use Atomic for Bool State to Reduce locking overhead
• Improved getprop function efficiency
• Avoid .to_string() in default closure
• [Inotify] Clamp the buffer_size growth to prevent it growing indefinitely
• Offloading some logic into a background thread

Notes:
What's the purpose of this module? Click here
Just Flash and enjoy the coldness 🤑

Battmon for devs has been updated to V2.0 (github)

Reuploaded Laya BatteryMonitor V2.0 with Significant compatibility improvement.
Exynos devices is working now.

Laya BatteryMonitor Module
Target device: Universal
By: @Laynsb

Download: Click Here
Version: V2.1-stable-250801-65492ad2

Changelog:
• Forcing to override governor permissions from read-only to read/write (this fixes was created due to encore tweaks module causing governor to be read-only)
• Reuses .join() paths once.
• Safer name extraction with let Some(...) = to avoid hidden bugs.
• Less .trim() redundancy (some min/max could include newline).
• Avoid unnecessary .clone() on Option<String>
• Minor code logic improvement and optimization

Notes:
What's the purpose of this module? Click here

Laya BatteryMonitor Module
Target device: Universal
By: @Laynsb

Download: Click Here
Version: V2.2-stable-250805-85676015

Changelog:
• Minor Code cleanup, Improved compatibility, and more-efficient property checks. For more information check changelog on github

Notes:
What's the purpose of this module? Click here

#LaynsbProject
Introduced Laya PriorityManager module / for developers?

What's the purpose of this manager?

• Automatically Set high priority when opening listed game, significantly improves performance efficiency and resource utilization.
- Optimized CPU, RAM, temperature, and I/O
- Speeds up cold start application
- Efficiently manages background resources

Need thermal mod tester for Dimensity 6080/700 5G

Pm @Laynsb

#LaynsbProject #Reborn #Module
Thermal Mod for Dimensity 8050/8020/1300/1200
By : @Laynsb
Version : 1.0 Stable Reborn - Performance

Download : Click Here

📌 Features:
• Better thermal works efficiency
• Better performance and stability
• Better smoothness in gaming and multitasking

📌 Changelog:
• Improved thermal stability & performance consistency
• Raised CPU/GPU trip points to 82–85 °C for safer max performance
• Delayed thermal actions slightly (longer EXIT times) to avoid rapid throttling
• Added temperature smoothing (ma_len filters) for stable readings
• Removed redundant/no-cooler entries where safe
• Fine-tuned cooler exit values for efficiency
• Improved balancing of CPU/GPU throttling actions
• Reduced unnecessary thermal triggers at low temps
• Optimized cooler triggers across AP/GPU/Camera zones

📝 Notes:
• Remove other thermal related modules because it can cause a conflict.
• Reuploaded with fixed libMtcLoader service doesn't load thermal.conf

Laya BatteryMonitor Module
Target device: Universal
By: @Laynsb

Download: Click Here
Version: V2.3-stable-250827-f8fdd049

Changelog:
• Major code improvement, Optimization, and Bug fixes. For more information check changelog on github

Notes:
• What's the purpose of this module? Click here
• This module has been Merged with ROM integration version
• Please Use this Version instead of previous V2.5

#LaynsbProject #Module #MT6833
Thermal Mod for Dimensity 6080/700
By : @Laynsb
Version : 1.0 Stable - Performance

Download : Click Here

📌 Features:
• Better thermal works efficiency
• Better performance and stability
• Better smoothness in gaming and multitasking

📌 Changelog:
• Improved thermal stability & performance consistency
• Raised CPU/GPU trip points to 82–85 °C for safer max performance
• Delayed thermal actions slightly (longer EXIT times) to avoid rapid throttling
• Added temperature smoothing (ma_len filters) for stable readings
• Fine-tuned cooler exit values for efficiency
• Improved balancing of CPU/GPU throttling actions
• Optimized cooler triggers across AP/GPU/Camera zones

📝 Notes:
• Remove other thermal related modules because it can cause a conflict
• Only works on MT6833 series

#LaynsbProject #Module #MT6877
Thermal Mod for Dimensity 920/1080
By : @Laynsb
Version : 1.0 Stable - Performance

Download : Click Here

📌 Features:
• Better thermal works efficiency
• Better performance and stability
• Better smoothness in gaming and multitasking

📌 Changelog:
• Improved thermal stability & performance consistency
• Raised CPU/GPU trip points to 82–85 °C for sustained safe max performance
• Delayed thermal actions (longer EXIT times) to reduce FPS drops from rapid throttling
• Added temperature smoothing (ma_len filters) for stable sensor readings
• Fine-tuned cooler exit values for higher efficiency
• Balanced CPU/GPU throttling for smoother gameplay and multitasking
• Optimized cooler triggers across AP, GPU, Camera, WMT, and Modem zones

📝 Note:
• Remove other thermal-related modules because they can cause conflict.

#LaynsbProject #Module #MT6877
Thermal Mod for Dimensity 1080/920
By : @Laynsb
Version : 2.0 Stable - Performance

Download : Click Here

📌 Features:
• Better thermal works efficiency
• Better performance and stability
• Better smoothness in gaming and multitasking

📌 Changelog:
• Fine-tuned cooler exit values for higher efficiency
• Optimized CPU/GPU throttling mechanism for lower temperature and smoother gameplay
• Optimized cooler triggers across AP, GPU, Camera, WMT, and Modem zones

📝 Note:
• Remove other thermal-related modules because they can cause conflict.

#LaynsbProject #Module #MT6896
Thermal Mod for Dimensity 8200/U
By : @Laynsb
Version : 1.0 Stable - EPerformance

Download : Click Here

📌 Features:
• Better thermal work efficiency & throttling mechanism
• Better performance and stability
• Better smoothness in gaming and multitasking

📌 Changelog:
• OEM bug fixed
Transsion don't realize they give the thermal an invalid data (freq=26500000 which means 26,5 Ghz)
• Cluster thresholds raised
CPU throttling begins later (42–64 °C range vs ~40–56 °C)
• Charger cooling tuned
Optimize steps to balances charging speed + safety
• Skin control target raised
Allows higher device surface temps before throttling

📝 Notes:
• Remove other thermal-related modules because they can cause conflict
• EPerf = efficient performance variant

Lmao Non root Module (AxManager)