Lenovo Legion Go controller pairing behavior on Nintendo Switch
I’m sharing an undocumented behavior I noticed while testing controller pairing.
Lenovo Legion Go controllers appear to switch Bluetooth profiles depending on the button combination used when powering them on.
In my case, the controller was only detected by the Nintendo Switch when powered on using this sequence:
1. Power on the Legion Go controller
2. Press the Legion quick settings button
3. Press D-Pad DOWN
4. The controller becomes discoverable and can be paired from:
Controllers → Change Grip / Order
If the controller is powered on normally or using a different button combo, it is not detected at all.
This behavior is not mentioned in Lenovo documentation and may explain why some people report inconsistent pairing results.
Posting this in case it helps others troubleshooting controller pairing.
https://redd.it/1pzj4dp
@r_SwitchHacks
I’m sharing an undocumented behavior I noticed while testing controller pairing.
Lenovo Legion Go controllers appear to switch Bluetooth profiles depending on the button combination used when powering them on.
In my case, the controller was only detected by the Nintendo Switch when powered on using this sequence:
1. Power on the Legion Go controller
2. Press the Legion quick settings button
3. Press D-Pad DOWN
4. The controller becomes discoverable and can be paired from:
Controllers → Change Grip / Order
If the controller is powered on normally or using a different button combo, it is not detected at all.
This behavior is not mentioned in Lenovo documentation and may explain why some people report inconsistent pairing results.
Posting this in case it helps others troubleshooting controller pairing.
https://redd.it/1pzj4dp
@r_SwitchHacks
Reddit
From the SwitchHacks community on Reddit
Explore this post and more from the SwitchHacks community
Amiigo 2.4.0 - Supports Latest Firmware
https://github.com/CompSciOrBust/Amiigo/releases/tag/2.4.0
https://redd.it/1pubjnz
@r_SwitchHacks
https://github.com/CompSciOrBust/Amiigo/releases/tag/2.4.0
https://redd.it/1pubjnz
@r_SwitchHacks
GitHub
Release 2.4.0: Enhance UI & Remove AmiiboAPI Functionality · CompSciOrBust/Amiigo
Changes to Amiigo:
Status bar now highlights when a status change occurs
Emuiibo version is now shown in the settings menu
Changed symbols used for special list entries
Reintroduced theme support
...
Status bar now highlights when a status change occurs
Emuiibo version is now shown in the settings menu
Changed symbols used for special list entries
Reintroduced theme support
...
Atmosphere 1.10.1 is now in released (21.1.0 support)
https://github.com/Atmosphere-NX/Atmosphere/releases/tag/1.10.1
https://redd.it/1phvmgq
@r_SwitchHacks
https://github.com/Atmosphere-NX/Atmosphere/releases/tag/1.10.1
https://redd.it/1phvmgq
@r_SwitchHacks
GitHub
Release Atmosphère 1.10.1 · Atmosphere-NX/Atmosphere
1.10.1 is Atmosphère's eighty-eighth official release.
Please be sure to update fusee when upgrading to 1.10.1. fusee-primary no longer exists, and will not work any more.
With thanks to the @s...
Please be sure to update fusee when upgrading to 1.10.1. fusee-primary no longer exists, and will not work any more.
With thanks to the @s...
Mission Control v0.14.1 released (21.1.0 support)
https://github.com/ndeadly/MissionControl/releases/tag/v0.14.1
https://redd.it/1pi4b14
@r_SwitchHacks
https://github.com/ndeadly/MissionControl/releases/tag/v0.14.1
https://redd.it/1pi4b14
@r_SwitchHacks
GitHub
Release MissionControl 0.14.1 · ndeadly/MissionControl
This release adds support for firmware 21.1.0, and fixes a minor button mapping bug from the previous release. See below for the full changelog.
New users landing on this release page should first ...
New users landing on this release page should first ...
Bridge Type ID's for the ACNH Save Editor
Spent the past 5 hours of my life creating this since no where else on the internet does it exist. So for all of you ACNH people who use the editor, enjoy. You first go to the edit field items, move to the building tab, select a current bridge or insert one using on of the none slots. Change the building type to 26, then chage type to the indicated number below for whatever bridge you want.
Stone Bridges
Straight
0 = 3 Spaces
1 = 4 Spaces
2 = 5 Spaces
Diagonal
3 = 3 Spaces
4 = 4 Spaces
5 = 5 Spaces
Suspension Bridges
Straight
7 = 3 Spaces
6 = 4 Spaces
8 = 5 Spaces
Diagonal
9 = 3 Spaces
10 = 4 Spaces
11 = 5 Spaces
Zen Bridges
Straight
19 = 3 Spaces
12 = 4 Spaces
20 = 5 Spaces
Diagonal
21 = 3 Spaces
22 = 4 Spaces
23 = 5 Spaces
Log Bridges
Straight
14 = 3 Spaces
13 = 4 Spaces
15 = 5 Spaces
Diagonal
16 = 3 Spaces
17 = 4 Spaces
18 = 5 Spaces
Red Zen Bridges
Straight
32 = 3 Spaces
24 = 4 Spaces
33 = 5 Spaces
Diagonal
34 = 3 Spaces
35 = 4 Spaces
36 = 5 Spaces
Iron Bridges
Straight
39 = 3 Spaces
25 = 4 Spaces
40 = 5 Spaces
Diagonal
41 = 3 Spaces
42 = 4 Spaces
43 = 5 Spaces
Wooden Bridges
Straight
44 = 3 Spaces
37 = 4 Spaces
45 = 5 Spaces
Diagonal
46 = 3 Spaces
47 = 4 Spaces
48 = 5 Spaces
Brick Bridges
Straight
49 = 3 Spaces
38 = 4 Spaces
50 = 5 Spaces
Diagonal
51 = 3 Spaces
52 = 4 Spaces
53 = 5 Spaces
Roped Offs
Straight
26 = 3 Spaces
27 = 4 Spaces
28 = 5 Spaces
Diagonal
29 = 3 Spaces
30 = 4 Spaces
31 = 5 Spaces
https://redd.it/1p7wqhh
@r_SwitchHacks
Spent the past 5 hours of my life creating this since no where else on the internet does it exist. So for all of you ACNH people who use the editor, enjoy. You first go to the edit field items, move to the building tab, select a current bridge or insert one using on of the none slots. Change the building type to 26, then chage type to the indicated number below for whatever bridge you want.
Stone Bridges
Straight
0 = 3 Spaces
1 = 4 Spaces
2 = 5 Spaces
Diagonal
3 = 3 Spaces
4 = 4 Spaces
5 = 5 Spaces
Suspension Bridges
Straight
7 = 3 Spaces
6 = 4 Spaces
8 = 5 Spaces
Diagonal
9 = 3 Spaces
10 = 4 Spaces
11 = 5 Spaces
Zen Bridges
Straight
19 = 3 Spaces
12 = 4 Spaces
20 = 5 Spaces
Diagonal
21 = 3 Spaces
22 = 4 Spaces
23 = 5 Spaces
Log Bridges
Straight
14 = 3 Spaces
13 = 4 Spaces
15 = 5 Spaces
Diagonal
16 = 3 Spaces
17 = 4 Spaces
18 = 5 Spaces
Red Zen Bridges
Straight
32 = 3 Spaces
24 = 4 Spaces
33 = 5 Spaces
Diagonal
34 = 3 Spaces
35 = 4 Spaces
36 = 5 Spaces
Iron Bridges
Straight
39 = 3 Spaces
25 = 4 Spaces
40 = 5 Spaces
Diagonal
41 = 3 Spaces
42 = 4 Spaces
43 = 5 Spaces
Wooden Bridges
Straight
44 = 3 Spaces
37 = 4 Spaces
45 = 5 Spaces
Diagonal
46 = 3 Spaces
47 = 4 Spaces
48 = 5 Spaces
Brick Bridges
Straight
49 = 3 Spaces
38 = 4 Spaces
50 = 5 Spaces
Diagonal
51 = 3 Spaces
52 = 4 Spaces
53 = 5 Spaces
Roped Offs
Straight
26 = 3 Spaces
27 = 4 Spaces
28 = 5 Spaces
Diagonal
29 = 3 Spaces
30 = 4 Spaces
31 = 5 Spaces
https://redd.it/1p7wqhh
@r_SwitchHacks
Reddit
From the SwitchHacks community on Reddit
Explore this post and more from the SwitchHacks community
Checkpoint 3.10.2 released: fix 21.0.0 compatibility and a few words about the state of the project
https://github.com/BernardoGiordano/Checkpoint/releases/tag/v3.10.2
https://redd.it/1p3pnr6
@r_SwitchHacks
https://github.com/BernardoGiordano/Checkpoint/releases/tag/v3.10.2
https://redd.it/1p3pnr6
@r_SwitchHacks
GitHub
Release Checkpoint 3.10.2 · BernardoGiordano/Checkpoint
I intended to add more value to this release by trying to enhance few things here and there, but I didn't manage to do it in the short time I had to get this build ready. I hope to bring someth...
I got a 2018 NAND backup up and running on an emuMMC.
It's like the damn thing was stuck in time for 7 years. Friends list full of people I haven't spoken to in years (some since literally mid-high school), no NSO (prior to it existing), old Miis, even some games. Nostalgia overload for sure.
If you guys have any suggestions to tinker around with this thing, let me know. This is genuinely so cool lol
Old friend I have zero contact with anymore
Home menu, firmware 5.1.0
https://redd.it/1p10xdl
@r_SwitchHacks
It's like the damn thing was stuck in time for 7 years. Friends list full of people I haven't spoken to in years (some since literally mid-high school), no NSO (prior to it existing), old Miis, even some games. Nostalgia overload for sure.
If you guys have any suggestions to tinker around with this thing, let me know. This is genuinely so cool lol
Old friend I have zero contact with anymore
Home menu, firmware 5.1.0
https://redd.it/1p10xdl
@r_SwitchHacks
Mission Control v0.14.0 released (21.0.0 support)
https://github.com/ndeadly/MissionControl/releases/tag/v0.14.0
https://redd.it/1oyzrdb
@r_SwitchHacks
https://github.com/ndeadly/MissionControl/releases/tag/v0.14.0
https://redd.it/1oyzrdb
@r_SwitchHacks
GitHub
Release MissionControl 0.14.0 · ndeadly/MissionControl
This release adds support for firmware 21.0.0, some new controllers, and a bugfix. See below for the full changelog.
New users landing on this release page should first check out the readme on the ...
New users landing on this release page should first check out the readme on the ...
Atmosphere 1.10.2 is now in released (21.2.0 support)
https://github.com/Atmosphere-NX/Atmosphere/releases/tag/1.10.2
https://redd.it/1qcg4zu
@r_SwitchHacks
https://github.com/Atmosphere-NX/Atmosphere/releases/tag/1.10.2
https://redd.it/1qcg4zu
@r_SwitchHacks
GitHub
Release Atmosphère 1.10.2 · Atmosphere-NX/Atmosphere
1.10.2 is Atmosphère's eighty-ninth official release.
Please be sure to update fusee when upgrading to 1.10.2. fusee-primary no longer exists, and will not work any more.
With thanks to the @sw...
Please be sure to update fusee when upgrading to 1.10.2. fusee-primary no longer exists, and will not work any more.
With thanks to the @sw...
Mission Control v0.14.2 released (21.2.0 support)
https://github.com/ndeadly/MissionControl/releases/tag/v0.14.2
https://redd.it/1qdzdkx
@r_SwitchHacks
https://github.com/ndeadly/MissionControl/releases/tag/v0.14.2
https://redd.it/1qdzdkx
@r_SwitchHacks
GitHub
Release MissionControl 0.14.2 · ndeadly/MissionControl
This release adds support for firmware 21.2.0.
New users landing on this release page should first check out the readme on the main project page for the official project documentation. There you ca...
New users landing on this release page should first check out the readme on the main project page for the official project documentation. There you ca...
Mission Control v0.11.0 released (18.0.0 support)
https://github.com/ndeadly/MissionControl/releases/tag/v0.11.0
https://redd.it/1bsvt95
@r_SwitchHacks
https://github.com/ndeadly/MissionControl/releases/tag/v0.11.0
https://redd.it/1bsvt95
@r_SwitchHacks
GitHub
Release MissionControl 0.11.0 · ndeadly/MissionControl
❗Important: This release requires Atmosphere version 1.7.0 or later❗
This is the twenty-third official release of Mission Control.
This release adds support for firmware 18.0.0, a new controller, a...
This is the twenty-third official release of Mission Control.
This release adds support for firmware 18.0.0, a new controller, a...
uLaunch v1.2.3 released (21.2.0 support)
https://github.com/XorTroll/uLaunch/releases/tag/1.2.3
https://redd.it/1qm33mm
@r_SwitchHacks
https://github.com/XorTroll/uLaunch/releases/tag/1.2.3
https://redd.it/1qm33mm
@r_SwitchHacks
GitHub
Release 1.2.3 - Yet another support update · XorTroll/uLaunch
Changelog
Recompiled with Atmosphère v1.10.2 support (21.2.0)
All keyboards are now properly supported when creating a new folder or changing the console nickname
Recompiled with Atmosphère v1.10.2 support (21.2.0)
All keyboards are now properly supported when creating a new folder or changing the console nickname
SciresM Retiring
Posted on the official GitHub:
https://gist.github.com/SciresM/e760b192d873af67ce8f0f5c7000a651
Here's hoping someone else picks up where this giant left off. All the best to SciresM as they pursue the better things in life.
https://redd.it/1qo1dn8
@r_SwitchHacks
Posted on the official GitHub:
https://gist.github.com/SciresM/e760b192d873af67ce8f0f5c7000a651
Here's hoping someone else picks up where this giant left off. All the best to SciresM as they pursue the better things in life.
https://redd.it/1qo1dn8
@r_SwitchHacks
Gist
Retiring.txt
GitHub Gist: instantly share code, notes, and snippets.
I made a native Linux app for compressing/decompressing Switch ROMs
https://redd.it/1qosrje
@r_SwitchHacks
https://redd.it/1qosrje
@r_SwitchHacks
Reddit
From the SwitchHacks community on Reddit: I made a native Linux app for compressing/decompressing Switch ROMs
Explore this post and more from the SwitchHacks community
tico (formely tiicu) alpha 0.5.0 is out (emulator frontend for nintendo switch)
tico 0.5.0 is out: today's update brings Sega Saturn running natively on Switch with HD resolutions and stable 60fps on 2D noscripts, SteamGridDB cover art integration, custom ROM path support, auto directory initialization, and BIOS validation. things are moving fast, more to come.
For newcomers: if you missed our last update, tico got a complete visual overhaul with full dark mode, Nintendo Switch profile integration, Dreamcast support, a full settings screen, and external core support on previous update https://github.com/ticohq/tico/releases
https://preview.redd.it/zwo67ah2y8kg1.png?width=1280&format=png&auto=webp&s=74136985c8385565dc5f2e92a9c7aa84618e2fc1
https://redd.it/1r81nz7
@r_SwitchHacks
tico 0.5.0 is out: today's update brings Sega Saturn running natively on Switch with HD resolutions and stable 60fps on 2D noscripts, SteamGridDB cover art integration, custom ROM path support, auto directory initialization, and BIOS validation. things are moving fast, more to come.
For newcomers: if you missed our last update, tico got a complete visual overhaul with full dark mode, Nintendo Switch profile integration, Dreamcast support, a full settings screen, and external core support on previous update https://github.com/ticohq/tico/releases
https://preview.redd.it/zwo67ah2y8kg1.png?width=1280&format=png&auto=webp&s=74136985c8385565dc5f2e92a9c7aa84618e2fc1
https://redd.it/1r81nz7
@r_SwitchHacks
GitHub
Releases · ticohq/tico
The first custom emulation frontend for Nintendo Switch — a controller-first, native C++ interface designed for performance, simplicity, and long-term portability. - ticohq/tico
Checkpoint 3.11.0 released: tons of bugfixes
https://github.com/BernardoGiordano/Checkpoint/releases/tag/v3.11.0
https://redd.it/1rdt7o2
@r_SwitchHacks
https://github.com/BernardoGiordano/Checkpoint/releases/tag/v3.11.0
https://redd.it/1rdt7o2
@r_SwitchHacks
GitHub
Release Checkpoint 3.11.0 · BernardoGiordano/Checkpoint
What's new
Added: backup and restore modal UI has been greatly improved with a proper progress bar.
Fixed: an issue with noscript cache persistence preventing new noscript installations from being r...
Added: backup and restore modal UI has been greatly improved with a proper progress bar.
Fixed: an issue with noscript cache persistence preventing new noscript installations from being r...
sys-ticon - Updated and stripped switch-sys-tweak for replacing icons and names
https://github.com/masagrator/sys-ticon
https://redd.it/1rgx0bc
@r_SwitchHacks
https://github.com/masagrator/sys-ticon
https://redd.it/1rgx0bc
@r_SwitchHacks
GitHub
GitHub - masagrator/sys-ticon: A sysmodule replacing in qlaunch icons, noscripts, publishers and display versions.
A sysmodule replacing in qlaunch icons, noscripts, publishers and display versions. - masagrator/sys-ticon