having trouble checking if a drive is mounted!

Greetings everyone,

​

I'm making a little wrapper for pmount to automate the mounting/dismounting of hotplugged LUKS USB devices. I'll post the noscript below.

https://pastebin.com/Tr9ZUEJe

I'm having trouble in particular with the "scan" function. I'm trying to get it to display eligable devices ONLY if they are not already currently mounted. I'm not sure how to do this. Currently, it displays (correctly) all devices which 1.) have a UUID and 2.) have an associated .key file in the $SECRETSDIR/luks folder. I'd like this output to exclude whatever is included in the "currentlymounted" array.

​

I'd really value any input about how to accomplish this, thanks in advance!

https://redd.it/11rk4b0
@r_bash

Emulate "Copy Link To Clipboard" By Copying Text Wrapper - How To?

Is it possible to do the copying in bash by emulating "copy link to clipboard" when the text wrapper is highlighted? Projecting this onto Markdown format of URL it would look like highlighting the [reddit!] segment of [reddit](https://reddit.com) with (https://reddit.com) going to the clipboard. Refer to the linked image for the visual example.

https://i.imgur.com/AvTIOaM.png

https://redd.it/11rjkpg
@r_bash

smenu is so cool! :)

A demo of what kind of menus you can make with smenu, and a small tour of the command line history too, which I have installed on Ctrl-n, since I have FZF on Ctrl-r.

smenu demo

https://redd.it/11rrfcs
@r_bash

My VOIP phone service provides an API to send SMS .. is this how its done using curl

API is

https://www.thevoipcompany.com/send-sms?username=username&password=password&to=destination&subnoscriptionId=subnoscription ID&text=message

My understanding curl could do this with something like this ... correct?

>curl -X POST -d 'username=username&password=password&to=destination&subnoscriptionId=subnoscription id&text=message' https://www.mynetfone.com.au/send-sms

If correct it would be simple to put it into a bash wrapper.

https://redd.it/11rved7
@r_bash

Bash continuous parallelization

I work with academic research, specifically with simulations. The important feature of these simulations in the context of the problem is that some of them take longer than others.

I want to run let's say 1000 simulations, each in a single thread of the processador. If my machine has 6 threads i can do several batches of 6 + one batch of the remaining.

Using something like:

./run.out 1 & ./run.out 2 & ./run.out 3 & ./run.out 4 & ./run.out 5 & ./run.out 6 & wait
./run.out 7 & ./run.out 8 & ./run.out 9 & ./run.out 9 & ./run.out 10 & ./run.out 11 & wait

And that's definetly runs faster than doing one by one, sequentially. But if i have at least process that takes a lot longer than the others, i'm losing precious time.

The final question is: Is there a simple way that can i set a fixed number of processes to be running at the same time, and as soon as one is finishes another one takes it place, that way i'm not bottlenecked by a single slower program.

I will greatly apreciate the help, since solving this would greatly improve my reseach.

https://redd.it/11rxgwt
@r_bash

How to run ffmpeg async to bash

I'm running into an issue where inotifywait stops running after its event fires and runs ffmpeg.

Here's my code:

#!/bin/bash
# This bash noscript uses inotifywait to watch a directory for new mp4 or mkv files and convert them using ffmpeg.


# Set the directory to watch

DIR="/home/stingwraith/Downloads"

# Wait for a new mp4 or mkv file to be created

inotifywait -m $DIR -e create -e movedto |

while read path action file; do
echo "The file '$file' appeared in directory '$path' via '$action'"

# Check if the file is an mp4 or mkv
if [[ $file == *.mp4 || $file == *.mkv || $file == *.ogv ]]; then
# resolution=$(ffprobe -v error -selectstreams v:0 -showentries stream=width,height -of csv=s=x:p=0 $DIR/$file)
# if [ ${resolution#*x} -lt 720 ]; then
# Convert the file using ffmpeg
echo "Starting conversion..."
ffmpeg -hwaccel vaapi -hwacceldevice /dev/dri/ renderD128 -i $DIR/$file -c:v libx264 -vf "scale=1024:576" -crf 25 -preset veryslow -r 22 -c:a aac -b:a 192k -ac 2 $DIR/$file.converted.mp4
echo "Conversion completed! Original file deleted!"
# Remove the original file
rm $DIR/$file
# else
#do something
# fi
fi
done




The problem is that while ffmpeg is running an encoding job, if any new files show up, it won't run ffmpeg on them.

Any help is much appreciated!

https://redd.it/11s2ga6
@r_bash

cp: cannot create regular file '/usr/local/bin/arduino-cli': Permission denied

Hello!

I have what is likely a really dumb question. I'm trying to automate the installation of the arduino-cli. I tried using the following line:

sudo curl -fsSL https://raw.githubusercontent.com/arduino/arduino-cli/master/install.sh | BINDIR=/usr/local/bin sh

When i try and run that, I get prompted for a password (which makes sense), and then I see this:

Installing in /usr/local/bin
ARCH=64bit
OS=Linux
Using curl as download tool
Downloading https://downloads.arduino.cc/arduino-cli/arduino-cli_0.31.0_Linux_64bit.tar.gz
cp: cannot create regular file '/usr/local/bin/arduino-cli': Permission denied
Failed to install arduino-cli

It appears to not want me to write to this directory, even with sudo access, so I'm a bit confused as to what the issue is, or how to resolve it. I ran :

ll /usr/local/bin

and received back:

drwxr-xr-x 2 root root 4096 Aug 12 2021 ./
drwxr-xr-x 10 root root 4096 Feb 9 2021 ../

If I use sudo, I assume this means I have write access to this folder but maybe I'm misunderstanding permissions. I assume it's somewhere along these lines but wanted to check before I poked around with it too much and broke something.

Any suggestions you can give me would be greatly appreciated. Thanks!

https://redd.it/11s4oay
@r_bash

Sshto update

Hi, another sshto update is here. I've played a bit with Selected\_hosts and I though that it could be handy to be able to save this list as permanent config file. Just run EditConf command for Selected_hosts group. Have fun)

https://preview.redd.it/ptifeme3uyna1.png?width=824&format=png&auto=webp&v=enabled&s=e56187548fbb3608618ccd82b277b4844ff6d14d

https://redd.it/11s8vp1
@r_bash

ANSI coloring function for bash noscripts, absurdly minified

I've been dabbling with this ANSI coloring function for injecting color into bash noscripts. All feedback is welcome!

Essentially, it works like this: https://i.imgur.com/BXEPxva.png

It supports the entire standard 4-bit ANSI palette with all foreground/background combinations, as well as bold and underline. This is a full table of its formatting and color codes: https://i.imgur.com/EKi9KIm.png


(Kudos to /u/o11c for critiquing the first draft and starting me on the path to shaving 200 bytes off my earlier attempt, even if maybe he's an exalted greybeard raised on monochrome monitors who wouldn't touch this function with a ten foot pole on his machines. I'm only guessing.)

-----

I often inherit noscripts from colleagues and folks on the web with coloring variables similar to these recent submissions:

-----

https://github.com/vaniacer/sshto/blob/master/sshto#L87



| Input | Output
---|---|----
This noscript | `printf "${BLD}${RED}${BBLU}"Hello!${DEF}"` | `\e[1m\e[31m\e[44mHello!\e[0m`
clr function | `printf "$(clr +rb)Hello!$(clr)"` | `\e[1;31;44mHello!\e[0m`

-----

https://github.com/Aj-Seven/Android-Sysinfo/blob/master/sysinfo.sh#L2

| Input | Output
---|---|----
This noscript | `echo "${yellow}${b_blue}foo` | `\e[0;93m\e[44mfoo`
clr function | `echo "$(clr Yb)foo"` | `\e[93;44mfoo`

-----

The function is highly minified, the secret sauce is using `colors="krgybmcw ="` with `i=${colors%%"${1,}"*}` and `${#i}` to find the offset of the color the character represents in the ANSI definitions.

| Black | Red | Green | Yellow | Blue | Magenta | Cyan | White | --- | Term Default
---|---|----|----|----|----|----|----|----|----|----|
My abbreviation | k | r | g | y | b | m | c | w | | =
ANSI fg | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | | 39
ANSI bg | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | | 49
ANSI bright fg | 90 | 91 | 92 | 93 | 94 | 95 | 96 | 97 | |
ANSI bright bg | 100 | 101 | 102 | 103 | 104 | 105 | 106 | 107 | |

I took liberal advantage of the fact that `bg=fg+10` and `bright=normal+60`.

I also wasted seven bytes on unnecessary capitulations toward `shellcheck`, but it passes now.

The ugly shortened variable names represent:

* in: input arguments
* b: basis for color numbering, 30 is the minimum, +60 for bright, +10 for background, +0 through +7 for hue
* bb: background bump, after setting a foreground color add 10 to the next color code to make it a background color instead of a foreground color
* c: single character read from `$in` on the while loop
* cs: control sequence, what goes between the `\e[` and the `m` in the ANSI formatting string

Note the function is defined as `clr() ( ... )` with parentheses instead of the standard `clr() { ... }` braces, this is to run it in a subshell so I can have a function (c2n, color to number) inside my function.

----

clr() (
local in="$*" colors="krgybmcw =" b bb c cs
[ "$in" ] || { printf "\e[0m"; return; }
c2n() { local i=${colors%%"${1,}"*}; printf "%d" "$((${#i}+b+bb))"; }
while c=${in::1}; [ "$c" ]; do in=${in:1}; b=30;
case $c in [A-Z]) ((b+=60));;&
[A-Za-z=]) cs+=";$(c2n "$c")"; (((bb+=10)>20)) && return 1 ;;
-) cs+=";22;24";; +) cs+=";1";; _) cs+=";4";; .) ((bb+=10));;
*) return 1;;
esac
done
printf "\e[%sm" "${cs#;}"
)

Did you know bash's `type` builtin will automatically reformat your functions with its standards for indentation and line breaks? Here's the same function as `type` outputs it for easier reading:

bash-5.1$ type clr
clr is a function
clr ()
{
( local in="$*" colors="krgybmcw =" b bb c cs;
[ "$in" ] || {
printf "\e[0m";
return
};
function c2n ()
{
local i=${colors%%"${1,}"*};
printf "%d" "$((${#i}+b+bb))"
};
while c=${in::1};
[ "$c" ]; do
in=${in:1};
b=30;
case $c in
[A-Z])
((b+=60))

;;&
[A-Za-z=])
cs+=";$(c2n "$c")";
(((bb+=10)>20)) && return 1
;;
-)
cs+=";22;24"
;;
+)
cs+=";1"
;;
_)
cs+=";4"
;;
.)
((bb+=10))
;;
*)
return 1
;;
esac;
done;
printf "\e[%sm" "${cs#;}" )
}

Again, all feedback is welcome! I'm not trying to encourage adoption of this thing, it's more of a puzzle of brevity and optimization. I learned a lot from /u/o11c the first time I showed it. (If you think you can use it, have at it.)

I especially don't like using `;22;24` to clear underline and bold formatting, but `\e[0m` clears the colors as well as the formatting, and I don't want to have to preserve any state to know which one needs clearing.

https://redd.it/11sjtcu
@r_bash

Measure the speed of source

The follow one show me the speed of the source "zero":

dd if=/dev/zero of=filename bs=1M count=1024 status=progress

But if my if my harddisk are not much faster than my source, I will measure not realy exact. Therefore, I would like to specify another target, which is probably faster. I think I have seen something that was written in dev 0 or similar. What do you take there and how do you specify that?

https://redd.it/11snkbm
@r_bash

How to make a CLI?

I’m wondering how you make custom commands like docker command or mysql command or git command.

How do you make that custom keyword that you use to execute the command?

I would like to make a dummy CLI for a small hobby project just to see how it’s done.

Could someone point me in a direction of what to read?

https://redd.it/11soloo
@r_bash

-X option for compgen works as not expected

Here is my completion:

#!/usr/bin/env bash

__md_to_clip__complete() {
declare current="$2"
declare previous="$3"

case "$previous" in
--output-directory|-od)
mapfile -t COMPREPLY < <(compgen -o dirnames -- "$current")
;;
--special-placeholder-config|-spc)
mapfile -t COMPREPLY < <(compgen -o filenames -X '!*.yaml' -- "$current")
;;
*)
mapfile -t COMPREPLY < <(compgen -W "--help -h
--version -v
--author -a
--email -e
--no-file-save -nfs
--output-directory -od
--special-placeholder-config -spc" -- "$current")
;;
esac
}

complete -F __md_to_clip__complete md-to-clip

I expect just YAML files to be suggested for `--special-placeholder-config|-spc` options. But even I have *.yaml files in the current directory, nothing is suggested after `md-to-clip --special-placeholder-config <TAB>`. I don't understand what's wrong. The doc [says](https://www.gnu.org/software/bash/manual/html_node/Programmable-Completion-Builtins.html) that:

> A leading ‘!’ in filterpat negates the pattern; in this case, any completion not matching filterpat is removed.

What I am missing?

https://redd.it/11spfi1
@r_bash

How to lint Bash code piece put in a Markdown file?

For instance, I've written Bash completion and placed it in a README file. Here are several questions:

- Is it possible to lint such Bash code (if it's inside README)?
- Is such wish is right at all? I just feel that all code put in README should be checked somehow not to permit some mistakes after copy-pasting written code from .sh files to Markdown.
- Is markdown suitable for a such task at all? Maybe there is something better?

shellcheck can't extract code from Markdown files and check it.

P. S. Yeah, it's possible to write a solution by yourself to extract code and then lint it, but are there any ready to go tools?

https://redd.it/11sq7kv
@r_bash

Baby in bash asking for feedbacks :)

Hello,
I'm a junior developer and since I use to work on both Mac and Windows, I was annoyed that I couldn't get my hand on a Windows alternative to the `fortune` command that would give you a quote, either by calling it or by setting up to display the quote each time you open a terminal.
So I tried to do something and got it to work.

But as mentioned above, I don't know bash so I'm not sure if this piece of command is good enough, reason I'm here to ask for some feedbacks and explanations if you got time.

screenshot

Repository

Thank you for your time and your help :).


Seb.

https://redd.it/11su6yv
@r_bash

-A directory vs -o dirnames in completion

I am confused, there are too very similar options: -A directory and -o dirnames. What's the point of having them both in complete built-in? When they can be combined and why? Why Bash developers decided to implement them both, instead of one thing?

https://redd.it/11sx6vs
@r_bash

Newbie at Bash

Hey guys, Im in the process of learning bash with Hack the Box and I find myself stuck at this question. i don't know if the python education is coming out to much in my thought process. I tried to google a lot but nothing seems to be working out for me. Any help would be amazing. Thank you!!


question: Create an "If-Else" condition in the "For"-Loop of the "Exercise Script" that prints you the number of characters of the 35th generated value of the variable "var". Submit the number as the answer.



#!/bin/bash
# Count number of characters in a variable:
# echo $variable | wc -c
# Variable to encode var="nef892na9s1p9asn2aJs71nIsm"
for counter in {1..40}
do var=$(echo $var | base64)
done

https://redd.it/11syvce
@r_bash

cp .htaccess{.dist,} say what?

Hello. I am installing DokuWiki and one step is:

cp /var/www/html/dokuwiki/.htaccess{.dist,}

This copies and strips the file .htaccess.dist from the suffix to become .htaccess. Nothing else.

(To be more precise, the instructions was to do that "cp" line, but I of course got "Permission denied" because I was not superuser, so doing a "sudo cp" switched ownership to root:root, but I digress.)

I try to wrap my head about what is going on there with the braces and comma, but "man cp" and google brings up nothing but confusion. The braces are for expanding parameters from ".dist" to NULL? Why is there no destination? It makes no sense to me.

I assume it is some usage of regular expressions in bash? Can anyone explain what they do? Why not just "cp .htaccess.dist .hpaccess" ?

https://redd.it/11t3d2t
@r_bash

Need help with debugging

Hey there! I was having trouble in regards to debugging a shell noscript running input tests for a code from java by comparing it to the output, I’m not really sure whether the I’m debugging it in git bash in the right way as I’m new to debugging in general, can anyone offer me any pointers in regards to how I should approach this situation? Any response/reply would be greatly appreciated.

https://redd.it/11t4lx1
@r_bash

I've run out of ideas on how to crawl a URL to check if a GitHub package has been updated

I have a noscript to compile FFmpeg and it requires a ton of other packages to build it the way I want it configured.

I have searched high and low for ways to crawl github to find out if a package has been updated since the last time the noscript was run.

So for example. If the packages libogg was updated from version x.x.x to a higher number then I want to export the version number into the noscript so that it shows the new update version when compiling along with naming the files appropriately as well.

Does anyone know of a way or some sort of manual in which I can do this? I really have run out of ideas on where to go from here.

Python maybe?

Help me out guys! =)

https://redd.it/11tjj09
@r_bash

Can you specify a bash version in shellcheck?

I've got a noscript that works perfectly on a device with bash 4.4.23 but it doesn't work correctly on a device with bash 4.3.48

So I was wondering if there was a way to tell shellcheck to check the noscript against bash 4.3.48

https://redd.it/11tmz3w
@r_bash