Using variables/functions from one bash file to another

How do I use variables/functions from one file to another file? Pls help.

I was looking for the help on web and all of them recommending source , but source command is executing the File-1 first

https://redd.it/137hrjd
@r_bash

I am on Windows system and trying to chmod +x to a .sh file on VSCODE, git bash terminal. I ran the command, and nothing changed. I read other posts on stack overflow, but I can't understand their solution and explanation. Also, there's no error messages or anything. Just, nothing happens.

note: I am running on my personal laptop so I am the admin. I tried SUDO but got "command not found" instead. This is for a webdev school project btw.

https://redd.it/137swgq
@r_bash

What does % after a variable name do?

I just saw in some legacy noscripts ${vers%} where vers is a version type passed in as an argument in the form of 1.0.1.

I can’t find anything online about it, and in testing it, it doesn’t seem to make a difference if it’s there or not. Any ideas?

https://redd.it/137uxvr
@r_bash

Package version is visible, but package not technically "Installed" from tar.gz.

If I try to extract a pre-compiled package from a tar.gz file to my system's /usr/local/bin and lib, I get the version of the package by doing <package_name> --version.


But I do not see it in the installed list when I do dpkg --list.
dpkg --status <package> says package not installed.

Am I missing something? Reminder that the tar.gz is pre-compiled.

https://redd.it/137xn0d
@r_bash

Need help debugging a noscript that runs a command given by parameter and stores stdout and stderr in variables

I am trying to make a function that will execute a command, store stdout and stderr in variables, check if the command errored or not, and then do something for each case. In this example I'm just echoing "success" or "failure".

This is the current state of the noscript:

#! /bin/bash

execute_with_error_handling() {
  step = $1
  shift

  # Execute the command passed as argument, store stdout and stderr in variables and capture the exit status
  exec 3>&1 4>&2
  output=$( { "$@" 2>&4 1>&3; echo $? > exit_status.tmp; } 2>&1 )
  exec 3>&- 4>&-

  # Separate stdout, stderr, and exit_status
  stdout=$(echo "${output}" | grep -v '^stderr:')
  stderr=$(echo "${output}" | grep '^stderr:' | sed 's/^stderr: //')
  exit_status=$(cat exit_status.tmp && rm exit_status.tmp)

  if [ "${exit_status}" -eq 0 ]; then
    echo "success"
    echo $stdout
    echo $stderr
  else
    echo "fail"
    echo $stdout
    echo $stderr
  fi
}

execute_with_error_handling "something that works" echo "hello world"
execute_with_error_handling "something that fails" false

https://redd.it/137zryq
@r_bash

BashLibrary
https://github.com/CecilWesterhof/BashLibrary

https://redd.it/1381ume
@r_bash

Comparing Float in if statement

I ran into a problem while comparing python version in my noscript, if anyone is familiar with this error please help

My noscript

#!/bin/bash
PYTHON="/usr/bin/python3"
PYTHON_VERSION=$(${PYTHON} --version | grep -Po "(\d+\.)[^ .]+")

    if [[ $PYTHON_VERSION -ge 3.11 ]] ; then
        echo "python - ok"
    elif [[ $PYTHON_VERSION -lt 3.11 ]] ; then
        echo "lowest version"
    fi

Error i am getting

./2.bash: line 5: [: 3.11: syntax error: invalid arithmetic operator (error token is ".11")**

**./2.bash: line 7: [[: 3.11: syntax error: invalid arithmetic operator (error token is ".11")**

[https://redd.it/138it52
@r_bash

Had a suit made, they asked if I wanted anything embroidered...
https://redd.it/138wgld
@r_bash

How to delete the last blank line in a .txt file?

Hi;
I’m working on a noscript that’s supposed to remove the white spaces and empty lines from a txt file. On a Macbook.
So far, I’ve been able to do that with sed an a regex pattern.
The issue is that it keeps the last blank line in place.
For example, once edited, I’d like my document to show:

- x
- y
- z

and stop there.
Instead, I’m getting:

- x
- y
- z
[blank line here]

Would you know why that happens?
I’ve tried many variations of suggested stackoverflow “sed” solutions, but none of them has been helpful so far.

https://redd.it/1394kj1
@r_bash

Replacing multiple spaces

Hi everyone.
So i have been trying to replace multiple (>2) whitspaces in a file with two dashes. --

I am trying this sed command. But it doesn't work.

 sed`s/[ ][ ]*/\-\-/g` 

Can anyone help?

Example

 Hi             Lokesh kumar             maxi 

Expected out

Hi--Lokesh kumar--maxi

https://redd.it/139e3dr
@r_bash

Finding the current cursor position in bash

The call for getting printed current row and col on screen are easy,(echo -e "^]]6n"), but it is harder to stuff the values into variables, so you can actually use them.

So, having other things to spend my time on, after a little while, I came by these two links, that seem okay for terminals in linux.

This way uses the ncurses tput command, which you should install anyways for this. Stack-exchange

The answer by Dennis Williamson in Stack Overlow post is more finicky but uses only bash, and, returns correct row/col positions for further use with ncurses.

https://redd.it/139hvju
@r_bash

assign fields parsed via awk; delimiter

Bash 5.1 on Linux Mint 21.1

i need to decode filenames always following this structure: Part1_Part2_Part3.wav
The delimiter is an underscore.

With the code field=$(echo "$file" | awk 'BEGIN{FS="_"} {print $3}' )" i only be successful, if there is an underscore behind Part3. Right now i add an underscore to all the files for the code to work. Is there another way?

https://redd.it/139kbnn
@r_bash

Creating a new variable from using grep on another variable

I am writing a noscript which enters a task into the taskwarrior app. The app response is "Created task number 114" (or any other number for that matter). I can catch that in a variable.

Now I want to use only the number (114) to use a a variable later (I can create a new task which is declared as dependent on task 114). According to what I have found already, this should work, but unfortunately does not:

Tasknumber=$(echo "$Response" | grep '[0-9\] {1,4}$')

when I echo $Tasknumber, it is empty.

Any tipps? Thank you

https://redd.it/139v7pb
@r_bash

Are fractional seconds in HISTTIMEFORMAT possible?

As the noscript says I'm interested whether or not it's possible to specify fractional seconds.

I already tried:

HISTTIMEFORMAT='%.3s '
HISTTIMEFORMAT='%s.%N '
HISTTIMEFORMAT='%s.%f '

It appears that it's not possible.

And I find that odd and dissatisfying, because I don't get "the issue" as why not.

That man page only says it must be in strftime format. GNU date accepts %N and bash's HISTTIMEFORMAT doesn't.

https://redd.it/139wiy9
@r_bash

How do i create a large text file crawler which crawls and finds keywords and condition quicker than usual grep awk considering the log file size as 10-20gb .gz file of text. Is there a way?



https://redd.it/13adoww
@r_bash

Is there a way to remove the background of dialog command? Currently its blue but I want it as terminal default or like black.



https://redd.it/13adkik
@r_bash

Is there a way to use grep with wildcards?

Example

$file ./-* | grep "ASCII text" -w

./-file07: ASCII text
./-file09: Non-ISO extended-ASCII text, with no line terminators

I just want ./-file07. In a sql query it would look like

Select file from files where name like “ASCII%”

This would only return the files that names began with ASCII

Im assuming there is a way to accomplish this right?? Thanks

https://redd.it/13b2pmg
@r_bash

For overthewire bandit level 14 nc is used to send password to localhost, if its correct it sends back “Correct!” with the next levels password. I am trying to replicate this but cant.

Solution is here: https://mayadevbe.me/posts/overthewire/bandit/level15/

This is how I tried to replicate it… I opened 2 terminals. In one terminal I started listening for inputs on port 1234. If the input matches “password” I wanted to send back “Success” but I cannot figure out how to send the response back and display it on the client terminal

Server

nc -l -p 1234 | grep "password" | xargs -I {} echo "Success”

Client

nc localhost 1234
> password

this is able to recognize when password is sent but the message is printed out server side. How can I get it to print out on the client side???

Thank you.

https://redd.it/13b961r
@r_bash

Remove Text Outside margins?

So basically I have a decent collection of PDF/ePub files that I’d like to strip out the header and footer info, like page number, chapter etc etc. so I can pass it through a text to speech generator, is there a reasonable way to accomplish this in a bash noscript? Maybe parameters so I can define the area to keep ?

https://redd.it/13bacau
@r_bash

Need help use AWK if then in a noscript

Good evening (EDT)

I am trying to write a short noscript that returns the last word of a file. This is pretty easy:

#!/bin/bash
sudo apt update &>/home/user/.config/polybar/modules/apt &&
cat /home/user/.config/polybar/modules/apt | awk 'END{print $1}'

(The word at the end of the file is how many APT packages need updating)

However, when everything is up to date, the noscript returns "All" as that is the first word of the last line of the temp file created in line 2 of the noscript.

What is a good way to return the first word of the last line UNLESS that word is "All" in which case "0" (or some other phrase) is returned?

Thank you!

https://redd.it/13b8cj0
@r_bash

What happens if I do kill -TERM 0

I know sending TERM to 0 will send TERM to ALL the process in current process group but will the following cause infinite loop?

trap "kill -TERM 0" TERM

./ child_process


I am trying to figure out the behaviour of current process after sending kill -TERM 0

https://redd.it/13bphhw
@r_bash