Android-15-Beta3-V1TD35M.83.zip
61.7 MB
What This Zip Contains??
~ V1TD35M.83 (Android 15 Beta 3) Boot Images with and without magisk And vendor_boot img
~ Please Don't flash it on ports .
Extracted by @ussr_1674
~ V1TD35M.83 (Android 15 Beta 3) Boot Images with and without magisk And vendor_boot img
~ Please Don't flash it on ports .
Extracted by @ussr_1674
Chnagelogs Of Matrix Latest A15 :
Device:
• Add complete support for moto g64 and moto g64y.
• FeLiCa Payment support added for Japanese units.
• Enable SecureNFC support for relevant variants.
• Fine Tune LMK and VM parameters.
• Set proper dalvik heap properties for 4/8/12gb RAM units.
• Update to proper CPUFreq Nodes on powerhint.
• Drop redundant panel modules and firmware.
• Implement VolumeSyncronizer for reducing the audio distortion at high volume.
• Remove thermal_core binary in favor of manually configuring the nodes.
• Disable game default refresh rate feature as it limits the refresh rate to 60fps in games on Android 15.
• Refactor boot performance setup.
• Kernel state at r1b2.
• All Thanks To @sarthakroy2002
Source:
• Initial android 15 release based on QPR1
• Minimal UI adoption
• Most of the A14 features added
Device:
• Add complete support for moto g64 and moto g64y.
• FeLiCa Payment support added for Japanese units.
• Enable SecureNFC support for relevant variants.
• Fine Tune LMK and VM parameters.
• Set proper dalvik heap properties for 4/8/12gb RAM units.
• Update to proper CPUFreq Nodes on powerhint.
• Drop redundant panel modules and firmware.
• Implement VolumeSyncronizer for reducing the audio distortion at high volume.
• Remove thermal_core binary in favor of manually configuring the nodes.
• Disable game default refresh rate feature as it limits the refresh rate to 60fps in games on Android 15.
• Refactor boot performance setup.
• Kernel state at r1b2.
• All Thanks To @sarthakroy2002
Source:
• Initial android 15 release based on QPR1
• Minimal UI adoption
• Most of the A14 features added
👍1
Steps to flash Custom Roms:
Required Firmware:
Steps:
1. Unlock the bootloader.
2. Enable USB debugging.
Note : Any slot must not be empty, means if u have ever used blankflash or flashed stock ROM using RSA then make sure u got any ota. Else don't flash.
To flash custom recovery:
1. Connect your phone to the PC.
2. Power off the device.
3. Press the volume down and power buttons simultaneously to enter fastboot mode.
4. Open the command prompt.
5. Execute following commands
(attach vendor_boot.img in place of vendor_boot.img).
6. Press Enter.
7. Done
For sideloading zip files (e.g. Roms):
After flashing recovery,
1. Enter fastboot mode.
2. Use the volume key to select Recovery and press power button to boot into recovery.
3. After recovery is shown,
4. Format data (must for those who are flashing for the first time or switching roms).
5. Select the "Apply update" option.
6. Select either ADB sideload or external storage sideload.
- For ADB, connect the phone to the PC, open the command prompt, and type "adb sideload (select rom zip)."
- For external storage, select the file location and flash.
7. Reboot the device.
Enjoy :)
Required Firmware:
Android 14 U1TD34M.94-12-7 or newer (Not Jan Update)Steps:
1. Unlock the bootloader.
2. Enable USB debugging.
Note : Any slot must not be empty, means if u have ever used blankflash or flashed stock ROM using RSA then make sure u got any ota. Else don't flash.
To flash custom recovery:
1. Connect your phone to the PC.
2. Power off the device.
3. Press the volume down and power buttons simultaneously to enter fastboot mode.
4. Open the command prompt.
5. Execute following commands
fastboot reboot fastbootfastboot flash vendor_bootvendor_boot.img
(attach vendor_boot.img in place of vendor_boot.img).
6. Press Enter.
7. Done
For sideloading zip files (e.g. Roms):
After flashing recovery,
1. Enter fastboot mode.
2. Use the volume key to select Recovery and press power button to boot into recovery.
3. After recovery is shown,
4. Format data (must for those who are flashing for the first time or switching roms).
5. Select the "Apply update" option.
6. Select either ADB sideload or external storage sideload.
- For ADB, connect the phone to the PC, open the command prompt, and type "adb sideload (select rom zip)."
- For external storage, select the file location and flash.
7. Reboot the device.
Enjoy :)
👍1
Changelogs For OS2.0.2.0.VNFMIXM :
~ Fixed Bluetooth, RIL, And Brightness Issue
~ Changed Firmware From Android 14 to 15 For More Stability
~ Added Screenshot Frame
~ Fixed Some Issues in Flashing Script
~ Fixed Overlays Related Issues
~ Ofox Included By Default
But before executing noscript you must be on stock recovery other than Ofox
~ Updated Launcher To More Smoother One and enable animations..
~ Added Some Props And Forced Fps to higher
~ Updated Device Info Values
~ By Default Kernel Is Stock
~ Fixed Face Unlock
Notes :
1. After botting rom Enable 5G by following this
2. Reboot Your Device To Fix This Issue
3. Give 1-2 Hours To Settle Rom
Bugs :
~ Fingerprint Option isn't appearing also don't have time to fix it
~ Fixed Bluetooth, RIL, And Brightness Issue
~ Changed Firmware From Android 14 to 15 For More Stability
~ Added Screenshot Frame
~ Fixed Some Issues in Flashing Script
~ Fixed Overlays Related Issues
~ Ofox Included By Default
But before executing noscript you must be on stock recovery other than Ofox
~ Updated Launcher To More Smoother One and enable animations..
~ Added Some Props And Forced Fps to higher
~ Updated Device Info Values
~ By Default Kernel Is Stock
~ Fixed Face Unlock
Notes :
1. After botting rom Enable 5G by following this
2. Reboot Your Device To Fix This Issue
3. Give 1-2 Hours To Settle Rom
Bugs :
~ Fingerprint Option isn't appearing also don't have time to fix it
👍3
This media is not supported in your browser
VIEW IN TELEGRAM
How to enable 5G in latest hyperos
Steps to flash HyperOS2.0:
~ First Flash Android 15 Stock Rom Through RSA Or Tiny noscript
~ Don't flash Any Recovery Or Anything Just Extract the HyperOS zip you downloaded And Execute Script. HyperOS Will Auto Flashed
Note : Don't change stock recovery to any other recovery use by default stock recovery for flashing..
~ First Flash Android 15 Stock Rom Through RSA Or Tiny noscript
~ Don't flash Any Recovery Or Anything Just Extract the HyperOS zip you downloaded And Execute Script. HyperOS Will Auto Flashed
Note : Don't change stock recovery to any other recovery use by default stock recovery for flashing..
Screenshot_PBRP_2025-12-21-04-34-04.png
76.4 KB
Pbrp Screenshots