This is how i am able to use Wan2.2 fp8 scaled models successfully on a 12GB 3060 with 16 GB RAM.
A little info before i start. When i try generating the normal way with the default workflow, the high noise part always succeeds, but it OOMs or outright crashes when switching to the low noise node. So now i know atleast the high noise works.
I also saw someone use the low noise model as a T2I generator. So i tried that and it worked without issues. So both of the models work individually but not continously on this card.
So what if there was a way to save the generated high noise data, and then feed that into the low noise node after clearing tha RAM and VRAM.
Here is the method i tried that worked.
https://pastebin.com/4v1tq2ML
step 1 - Disable the low noise group so only the high noise group is active. Click run. it will
save the data with the 'Save Latent' node.
After its done, it should save a .latent file in outputs/latents.
step 2 - Important. Unload models and execution cache.
you can use this
https://preview.redd.it/t4bm4rcd558g1.png?width=559&format=png&auto=webp&s=7a2127e439dd5ec2d19db57e3bded7fd4db2d459
or if you have installed christools, use these two
https://preview.redd.it/gew5jybh558g1.png?width=1155&format=png&auto=webp&s=dc2bb969a65254e8326c0533b78f010e1a8dd71d
sometimes you have to click this twice to work. make sure vram is cleared or it will definately throw out an OOM
step 3 - Disable the high noise group and enable the low noise group.
step 4 - Open the output/latents folder and drag the .latent file on this node. or just upload it
the normal way.
https://preview.redd.it/8nsmoehi658g1.png?width=203&format=png&auto=webp&s=7e0f5aeee21fe23cb947f6cadd4ccc6aa732448c
Click run.
https://reddit.com/link/1pqip5g/video/mlokkyta758g1/player
this is generated using fp8 scaled model on 3060 and 16 GB ram.
https://reddit.com/link/1pqip5g/video/hb3gncql758g1/player
here is the the same video with upscaled and with frame interpolation, The output set to 32fps.
the original video is 640x640, 97 frames, took 160 seconds on high and 120 seconds on low. thats around 5 minutes. the frame interpolated took a minute longer.
if you are using an older GPU and you are stuck with weaker quant ggufs like Q4, try this method with Q5 or Q6.
I am sure there is a better way to do all this. like adding the Clean vram node between the switch. It always runs out of memory for me. This is the way that has worked for me.
You can also generate multiple high noise latents at once. And then feed that data to the low noise node one by one. That way you can generate multiple videos with just loading both the models once.
https://redd.it/1pqip5g
@rStableDiffusion
A little info before i start. When i try generating the normal way with the default workflow, the high noise part always succeeds, but it OOMs or outright crashes when switching to the low noise node. So now i know atleast the high noise works.
I also saw someone use the low noise model as a T2I generator. So i tried that and it worked without issues. So both of the models work individually but not continously on this card.
So what if there was a way to save the generated high noise data, and then feed that into the low noise node after clearing tha RAM and VRAM.
Here is the method i tried that worked.
https://pastebin.com/4v1tq2ML
step 1 - Disable the low noise group so only the high noise group is active. Click run. it will
save the data with the 'Save Latent' node.
After its done, it should save a .latent file in outputs/latents.
step 2 - Important. Unload models and execution cache.
you can use this
https://preview.redd.it/t4bm4rcd558g1.png?width=559&format=png&auto=webp&s=7a2127e439dd5ec2d19db57e3bded7fd4db2d459
or if you have installed christools, use these two
https://preview.redd.it/gew5jybh558g1.png?width=1155&format=png&auto=webp&s=dc2bb969a65254e8326c0533b78f010e1a8dd71d
sometimes you have to click this twice to work. make sure vram is cleared or it will definately throw out an OOM
step 3 - Disable the high noise group and enable the low noise group.
step 4 - Open the output/latents folder and drag the .latent file on this node. or just upload it
the normal way.
https://preview.redd.it/8nsmoehi658g1.png?width=203&format=png&auto=webp&s=7e0f5aeee21fe23cb947f6cadd4ccc6aa732448c
Click run.
https://reddit.com/link/1pqip5g/video/mlokkyta758g1/player
this is generated using fp8 scaled model on 3060 and 16 GB ram.
https://reddit.com/link/1pqip5g/video/hb3gncql758g1/player
here is the the same video with upscaled and with frame interpolation, The output set to 32fps.
the original video is 640x640, 97 frames, took 160 seconds on high and 120 seconds on low. thats around 5 minutes. the frame interpolated took a minute longer.
if you are using an older GPU and you are stuck with weaker quant ggufs like Q4, try this method with Q5 or Q6.
I am sure there is a better way to do all this. like adding the Clean vram node between the switch. It always runs out of memory for me. This is the way that has worked for me.
You can also generate multiple high noise latents at once. And then feed that data to the low noise node one by one. That way you can generate multiple videos with just loading both the models once.
https://redd.it/1pqip5g
@rStableDiffusion
Pastebin
wan 2.2 split - Pastebin.com
Pastebin.com is the number one paste tool since 2002. Pastebin is a website where you can store text online for a set period of time.
Advice for beginners just starting out in generative AI
Run away fast, don't look back.... forget you ever learned of this AI... save yourself before it's too late... because once you start, it won't end.... you'll be on your PC all day, your drive will fill up with Loras that you will probably never use. Your GPU will probably need to be upgraded, as well as your system ram. Your girlfriend or wife will probably need to be upgraded also, as no way will they be able to compete with the virtual women you create.
too late for me....
https://redd.it/1pqqfqv
@rStableDiffusion
Run away fast, don't look back.... forget you ever learned of this AI... save yourself before it's too late... because once you start, it won't end.... you'll be on your PC all day, your drive will fill up with Loras that you will probably never use. Your GPU will probably need to be upgraded, as well as your system ram. Your girlfriend or wife will probably need to be upgraded also, as no way will they be able to compete with the virtual women you create.
too late for me....
https://redd.it/1pqqfqv
@rStableDiffusion
Reddit
From the StableDiffusion community on Reddit
Explore this post and more from the StableDiffusion community
TurboDiffusion: Accelerating Wan by 100-200 times . Models available on huggingface
https://redd.it/1pqxxoh
@rStableDiffusion
https://redd.it/1pqxxoh
@rStableDiffusion
Reddit
From the StableDiffusion community on Reddit: TurboDiffusion: Accelerating Wan by 100-200 times . Models available on huggingface
Explore this post and more from the StableDiffusion community
New Desktop UI for Z-Image made by the creator of Stable-Fast!
https://redd.it/1pr5a03
@rStableDiffusion
https://redd.it/1pr5a03
@rStableDiffusion
GOONING ADVICE: Train a WAN2.2 T2V LoRA or a Z-Image LoRA and then Animate with WAN?
What’s the best method of making my waifu turn tricks?
https://redd.it/1pqxw2j
@rStableDiffusion
What’s the best method of making my waifu turn tricks?
https://redd.it/1pqxw2j
@rStableDiffusion
Reddit
From the StableDiffusion community on Reddit
Explore this post and more from the StableDiffusion community
I added a lot more resources in photographic tools for SDXL.
https://redd.it/1praani
@rStableDiffusion
https://redd.it/1praani
@rStableDiffusion
Reddit
From the StableDiffusion community on Reddit: I added a lot more resources in photographic tools for SDXL.
Explore this post and more from the StableDiffusion community