Stuck trying to get a find cmd to echo No File Found when a file is not found

for SOURCE in "${SOURCES@}"; do

## Set file path
FILEPATH="${ORIGIN}/${SOURCE}/EIB/"

echo " "
echo "Searching for ${SOURCE} file..."
echo " "

FILESFOUND=()

find "${FILEPATH}" -type f -print0 | while IFS= read -r -d '' file; do
FILESFOUND+=("$file")
FILENAME=$(basename "$file")
echo "THIS WOULD BE WHERE THE SCRIPT CP FILE"
done
if ${#FILES_FOUND[@} -eq 0 ]; then
echo "No File Found in ${FILEPATH}"
continue
if
done




I have tried a couple ways to do this, setting FILES\FOUND to false and then true inside the while loop, using the array(seen in the code above), moving the if statement inside the while loop. The latter didn't out out No File Found when a file was found, the other ways put No File Found when a file was found.

Since the while loop is creating a subshell, the variable that is being set outside it I don't think is being updated correctly


https://redd.it/1e4t4vm
@r_bash

looking for a bash configuration

Hi guys does anyone have any good bash configurations or recommendations that I could implement on my Ubuntu 24.04 machine? Any help or advice appreciated

https://redd.it/1e5ddvr
@r_bash

HTTP request in coreVM

Anyone know what coreVM is? I hope so because I'm doing a cybersecurity midterm in college and I've been stuck on this question for 2 days:

Use one PC of the first network as a webserver and make an HTTP request from another PC of the second network to this webserver. Get a Wireshark capture of the overall HTTP interaction and explain this thoroughly. (15%)

Is there a command in /bin/sh and bash I can use to make an HTTP request? Thank you.

https://redd.it/1e5emh4
@r_bash

Can someone check this noscript is it safe to run,

HELLO, I am new to linux currently using MXLinux which is debian basied,, i tell chatgpt to write noscript that remove unused linux kernals and headers. Please review if it is safe to run.



#!/bin/bash

# Get the latest kernel version

latest_version=$(uname -r)



# List all installed kernels and headers

kernel_list=$(dpkg -l | grep linux-image | awk '{print $2}')

headers_list=$(dpkg -l | grep linux-headers | awk '{print $2}')



# Iterate over the kernel list, remove all but the latest version

for kernel in $kernel_list; do

if [ $kernel != "linux-image-${latest_version}" \]; then

sudo apt-get purge -y $kernel

fi

done



# Iterate over the headers list, remove all but the latest version

for headers in $headers_list; do

if [ $headers != "linux-headers-${latest_version}" \]; then

sudo apt-get purge -y $headers

fi

done



# Update grub

sudo update-grub





https://redd.it/1e5g8mu
@r_bash

Bash Question

Hii,

Good afternoon, would there be a more efficient or optimal way to do the following?

#!/usr/bin/env bash

foo(){
local FULLPATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
local _path=""
local -A _fullPath=()

while IFS="" read -d ":" _path ; do

_fullPath[$_path]=""

done <<< ${FULLPATH}:

while IFS="" read -d ":" _path ; do

[[ -v _fullPath[$_path] ]] || _fullPath[$_path]=""

done <<< ${PATH}:

declare -p _fullPath
}

foo

I would like you to tell me if you see something unnecessary or what you would do differently, both logically and syntactically.

I think for example that it does not make much sense to declare a variable and then pass it to an array through a loop, it would be better to directly put the contents of the variable `FULLPATH` as elements in the array `_fullPath`, no?

The truth is that the objective of this is simply that when the noscript is executed, it adds to the user's PATH, the paths that already had the `PATH` variable in addition to those that are present as value in the `FULLPATH` variable.

I do this because I have a noscript that I want to run from the crontab of a user but I realized that it gives error because the `PATH` variable from crontab is very short and does not understand the paths where the binaries used in the noscript are located.

Possibly there is another way to do it simpler, simpler or optimal, if you are so kind I would like you to give me your ideas and also if there is a better way to do the above, I have seen that the default behavior of read is to read up to a line break, then I could not use `IFS` and I had to use `-d “:”` for the delimiter to be a colon, I do not know if you could do that differently.

I have also opted to use an associative array instead of doing:

IFS=“:” read -ra _fullPath <<< $PATH

Then I could use `[[ -v ... ]]` to check if the array keys are defined instead of making a nested loop to check the existence of the elements of an array in another one, I don't know if this would be more efficient or not.

Thanks in advance 😊

https://redd.it/1e5koxt
@r_bash

Django API not auto-starting

I'm finalizing a Django API deployment on AWS EC2, and using this noscript to start the app:

#!/usr/bin/env bash
set -e

PROJECT_MAIN_DIR_NAME="SBY-backend"

# Validate variables
if [ -z "$PROJECT_MAIN_DIR_NAME" ]; then
    echo "Error: PROJECT_MAIN_DIR_NAME is not set. Please set it to your project directory name." >&2
    exit 1
fi

# Change ownership to ubuntu user
sudo chown -R ubuntu:ubuntu "/home/ubuntu/$PROJECT_MAIN_DIR_NAME"

# Change directory to the project main directory
cd "/home/ubuntu/$PROJECT_MAIN_DIR_NAME"

# Activate virtual environment
source "/home/ubuntu/$PROJECT_MAIN_DIR_NAME/venv/bin/activate"

# Restart Gunicorn and Nginx services
sudo service gunicorn restart
sudo service nginx restart

# Start API
cd $PROJECT_MAIN_DIR_NAME/
python3 manage.py runserver 0.0.0.0:8000

The problem is the API isn't auto-starting. As far as I can tell everything's installed correctly. I'm able to connect to the EC2 instance terminal, and enter the following commands manually, and the API is accessible:

~$ source /home/ubuntu/SBY-backend/venv/bin/activate
~$ cd SBY-backend/
~/SBY-backend$ python3 manage.py runserver 0.0.0.0:8000

As soon as I close the AWS EC2 terminal connection, the API is no longer accessible. I thought nginx was supposed to help keep the server running.
How can I set this up so the API is accessible after I disconnect from the EC2 instance terminal?

https://redd.it/1e5yxzp
@r_bash

Asciiquarium with planets

Hey yall! Was thinking of making a "planetarium" for the CLI, something along the lines of asciiquarium but, yk, planets and orbits. Idk if asciiquarium is the right thing to compare to, as it basically will be a sorta randomly generated solar system, but it's what gave me the idea. Does something like this already exist, and if so, what's it called? (Except from globe, ik that one)

https://redd.it/1e6f2nm
@r_bash

Why can my command embedded in a noscript only able to be executed when typed in the terminal?

Cross posting from ask ubuntu

I wrote a noscript to get sequences corresponding to some id's.

# Process each genome ID in array
for id in "${genome_ids[@]}"; do
echo "Processing genome ID: $id"
# Construct the command
command="p3-genome-fasta --protein $id"

# Execute the command
$command



Example output: Processing genome ID: 1000289.10 p3-genome-fasta --protein 1000289.10 . at /usr/share/bvbrc-cli/deployment/plbin/p3-genome-fasta.pl line 47.

It says there's an error, but when I copy and paste the command printed to the screen, it works?

Related code from p3-genome-fasta.pl

# Get the genome ID.
my ($genomeID) = @ARGV;
if (! $genomeID) {
die "No genome ID specified.";
} elsif (! ($genomeID =~ /^\d+\.\d+$/)) {
die "Invalid genome ID $genomeID."; <<<<< line 47
}

https://redd.it/1e6kmmr
@r_bash

ffmpeg make video from image sequence with decreasing speed

Is there an option to do this?

I took screenshots, each one moved further to the left than the previous one by 10 px. For now I have managed to generate an animated gif, but I would like to make a video in which the speed decreases

https://redd.it/1e77ho2
@r_bash

grep command guidance

Not sure if this is the best place for this but here goes:
I'm trying to build an implementation of grep by following that codecrafters (step by step project building guide, for those who don't know) thing and the current step is having to implement the `+` pattern, which is supposed to match a certain thing one or more time.

I went through the man page for grep and this is all that's written there too, that it matches the previous pattern one or more times.

Here's what I'm curious about. Does this pattern take into account the next normal pattern? For ex, if my pattern is "\\w+abc", would it match on the input "xyzabc" (under my reasoning, \\w+ carries on until it keeps matching, but the + pattern stops matching in case the next pattern also matches (the next pattern here being the literal "a"). Am I right, or does \\w+ consume all alphanumeric characters?

https://redd.it/1e78yi9
@r_bash

Question on using <su -c>, I’m missing something here on how the command is getting interpreted.

When I run the following command (logged in as root) I am presented with a “-sh: ./app: Permission denied”.

su -c “./app” - foo

However, when I specify additional instructions here it works.

su -c “cd /home/foo && ./app” - foo

If im already in the directory why wouldn’t the above command work? Is the su executing this command from a different location than where im currently sitting in?

https://redd.it/1e79cfd
@r_bash

Bash/Freecodecamp

#!/bin/bash

# Program to tell a persons fortune

echo -e "\n~~ Fortune Teller ~~\n"

RESPONSES=("Yes" "No" "Maybe" "Outlook good" "Don't count on it" "Ask again later")
N=$(( RANDOM % 6 ))

function GET_FORTUNE() {
if [[ ! $1 ]]
then
echo Ask a yes or no question:
else
echo Try again. Make sure it ends with a question mark:
fi

read QUESTION
}

GET_FORTUNE

until [[ $QUESTION =~ \?$ ]]
do
GET_FORTUNE again
done

echo -e "\n$RESPONSES[$N]"

Hi I am go through this pj in Freecodecamp and cannot understand what it means here:
If [[ ! $1 ]]

Does ! mean negation and $1 mean 1st argument? But if I dont pass any argument then the coding still run out the same result. Can anyone explain?

https://redd.it/1e7mw69
@r_bash

Bash syntax

Hi does anyone can explain what this condition means?
If [ ! $1 ]

Thanks

https://redd.it/1e7n73w
@r_bash

Advanced Terminal Tips and Tricks
https://www.bitsand.cloud/posts/terminal-tips/

https://redd.it/1e7qaks
@r_bash

Working on a bash completion library, including a function to delete a compword from the scope-local command line. What edge cases am I missing?

Title of post.

A common pattern for me lately is to extend existing commands like `pass` and `git`, both of which have functionality to pick up extension command executables by naming convention and run their respective completion routines. My use case is a bit unique in that many of my extensions accept their own args and then pass through to other existing subcommands of the wrapped command. E.g., I'm currently working on updating my [pw](https://github.com/marcxjo/pw) noscript to run according to the following syntax:

pass store ssh github.com/me

`pw` is just a wrapper that sets the `PASSWORD_STORE_DIR` envar to allow completion of an alternative password store. Hence `pw` and `pass store` are completely equivalent, and either provide passthrough to existing `pass` commands.

To facilitate this and other noscripts I've written, I'm working on a small extension library for `bash-completion` to handle my specific use cases, the foundation of which is a function to enable removing a compword from the compline*. The idea is that, in order to handle `pass` completion in the scenario above, since `pass` has no knowledge of the `store` keyword or its arg, in order to handle passthrough to `pass` I'd forward a compline that simply does not contain these words.

At least in my head, the algorithm is simple: to remove a single word `$n` from `COMP_*`:

COMP_WORD=( "${COMP_WORD[@]:0:n}" "${COMP_WORD[@]:n+1}")
COMP_LINE="${COMP_WORD[*]}"
COMP_CWORD=$((COMP_CWORD - 1))
COMP_POINT=$((COMP_POINT - ${whitespace_before_argn} - ${#n} - ${whitespace_after_argn} + 1))

Note that the intent in `COMP_POINT` would be to collapse all extraneous spaces flanking the deleted `$n` to a single whitespace. I feel like they're may be an edge case I'm missing in doing so, but not totally sure. What, if anything, am I missing to ensure that this works as intended in the general case? What weird behaviors or surprising inputs does this algorithm fail to consider? As always, any and all insight is appreciated.

\* Really, a local copy of the compline, but that's neither here nor there

https://redd.it/1e7xlis
@r_bash

Setting Up RAID with Caching on Ubuntu

### Purpose
I came up with this noscript which I then modified to be more universal so more people could use it without having to change a ton of stuff (unless you are not on Ubuntu then you might have to).


### Script execution
- Updates package lists and installs necessary packages (mdadm, lvm2, bcache-tools, nvme-cli).
- Rescans SCSI and NVMe buses.
- Partitions the specified disks.
- Creates a RAID array with the specified RAID type and disks.
- Initializes the RAID array as a cache device.
- Attaches the cache to the main RAID array.
- Creates an ext4 filesystem on the cached RAID array.
- Mounts the RAID array and updates /etc/fstab to ensure it mounts at boot.
- Provides detailed feedback and error handling throughout the process.


#### User Variables
- MAIN_RAID_TYPE : RAID type for the main RAID array (e.g., 10).
- CACHE_RAID_TYPE : RAID type for the caching RAID array (e.g., 0).
- MAIN_RAID_DISKS : Array of disks for the main RAID array (e.g., /dev/sdc /dev/sdd /dev/sde /dev/sdf).
- CACHE_RAID_DISKS : Array of disks for the caching RAID array (e.g., /dev/nvme1n1 /dev/nvme2n1).

#### Usage Instructions
1. Set the RAID Types and Disks: Open the noscript and set the MAIN_RAID_TYPE, CACHE_RAID_TYPE, MAIN_RAID_DISKS, and CACHE_RAID_DISKS variables at the top of the noscript.
2. Save the Script: Save the noscript to a file, for example, setup_raid_with_cache.sh.
3. Make the Script Executable:

    chmod +x setup_raid_with_cache.sh
    

4. View Help Menu: Run the noscript with the --help or -h option to view the help menu:

    sudo ./setup_raid_with_cache.sh --help
    

5. Run the Script as Root or with sudo:

    sudo ./setup_raid_with_cache.sh
    

#### Example Configuration

MAIN_RAID_TYPE=10
CACHE_RAID_TYPE=0
MAIN_RAID_DISKS=(/dev/sdc /dev/sdd /dev/sde /dev/sdf)
CACHE_RAID_DISKS=(/dev/nvme1n1 /dev/nvme2n1)
sudo ./setup_raid_with_cache.sh

### Sourcing the noscript
You can get the noscript on GitHub here

https://redd.it/1e84grh
@r_bash

Best Bash Learning Resources?

Hello there,

an intermediate software engineering student here

i want some good and beginner friendly bash sources to learn from

Note: i prefer reading that watching videos, so books/articles would be greatly appreciated.

https://redd.it/1e86doo
@r_bash

Maelstrom: Open-Source Stress Test Tool for Your APIs

Hey Reddit!

I just open-sourced on MIT license a new stress test tool ("**Maelstrom**"), that was useful to me. It’s lightweight and designed to be efficient for testing API endpoints with configurable parameters. Here are some of its key features:

* **Customizable Parameters**: Set the number of requests, concurrency level, retry limits, and more.
* **Detailed Logging**: Keep track of HTTP status codes and response times.
* **Email Notifications**: Get summaries of test results via email (optional).
* **Graceful Shutdown**: Handles interruptions smoothly.
* **Latency Metrics**: Helps understand average latency of APIs
* **Graceful Shutdown**: Handles interruptions smoothly.
* **Multi-threaded by design**: Simulates multi-threaded concurrent requests to API Endpoints

GitHub: [https://github.com/twentyone24/maelstrom](https://github.com/twentyone24/maelstrom)

Check it out if you’re interested. I’d love to hear any feedback or suggestions!

Cheers! Thanks for your time :-)

https://redd.it/1e8glqo
@r_bash

how do you know grand-father-dir-size?

Hi, I'd like to learn about any commands for know size of father dir I mean /media/user/A/ that has lots of childs dirs and files. Size of units ...

I tryed ls -lh but it did not say the real size.

That's all folks!

https://redd.it/1e8n3ec
@r_bash

a tiny program i wrote in bash to help ollama models management easier
https://redd.it/1e8odv3
@r_bash

How to handle ctrl+c in bash noscripts

Hello Guys!

I have wrote an article on Medium on how to handle ctrl+c in bash noscripts using the 'trap' command



For Medium users with a subnoscription: https://lovethepenguin.com/how-to-handle-ctrl-c-in-bash-noscripts-d7085e7d3d47



For Medium users without a subnoscription: https://lovethepenguin.com/how-to-handle-ctrl-c-in-bash-noscripts-d7085e7d3d47?sk=8a9020256b1498196a923c5521619228



Please comment on what you liked, did you find this article useful?

https://redd.it/1e8plnu
@r_bash