Quick tip: how to disable audio suspend in Pipewire.
You hate the —POP— in your headphones whenever you playback something? You hate the constant —HUMMMMMMING— in the speakers of your Hifi amplifier whenever you don’t playback something? You hate both?
Well, this “feature” was brought to you by hardware manufacturers so you can save precious “up to” 100mW on your mobile device. If you don’t playback. What it does: it de-powers the headphone/speaker amplifier when not used. Which makes a connected 100W Hifi amplifier float and pick up whatever electrical noise is on its input. And which makes it go —POP— once the output of the computer is powered again.
# Horrible.
I’m not an audiophile. Yet both side effects of that “power saving” measure are driving me nuts. And thanks to the plethora of different audio systems in Linux, I have to search like a squirrel for its provisions of nuts each time where to disable it. NUTS!
Okay, here’s how you do it in the latest version of Pipewire: edit the file
Search for the line saying
node:sendcommand("Suspend")
(around line 55 in my version) and disable that “feature” by making it a mere comment:
-- node:sendcommand("Suspend")
Then restart your logged in user’s wireplumber:
$ systemctl --user restart wireplumber.service
and —POP— and —HUMMMMMMMMMMMMM— be-gone.
# Shoutout to the Pipewire developers.
Disable that bullshit by default. Unlike me, you will also find a clean solution for this which only affects outputs that are susceptible to the —POP— and —HUMMMMING— problem.
https://redd.it/1pn41yb
@r_linux
You hate the —POP— in your headphones whenever you playback something? You hate the constant —HUMMMMMMING— in the speakers of your Hifi amplifier whenever you don’t playback something? You hate both?
Well, this “feature” was brought to you by hardware manufacturers so you can save precious “up to” 100mW on your mobile device. If you don’t playback. What it does: it de-powers the headphone/speaker amplifier when not used. Which makes a connected 100W Hifi amplifier float and pick up whatever electrical noise is on its input. And which makes it go —POP— once the output of the computer is powered again.
# Horrible.
I’m not an audiophile. Yet both side effects of that “power saving” measure are driving me nuts. And thanks to the plethora of different audio systems in Linux, I have to search like a squirrel for its provisions of nuts each time where to disable it. NUTS!
Okay, here’s how you do it in the latest version of Pipewire: edit the file
/usr/share/wireplumber/noscripts/node/suspend-node.luaSearch for the line saying
node:sendcommand("Suspend")
(around line 55 in my version) and disable that “feature” by making it a mere comment:
-- node:sendcommand("Suspend")
Then restart your logged in user’s wireplumber:
$ systemctl --user restart wireplumber.service
and —POP— and —HUMMMMMMMMMMMMM— be-gone.
# Shoutout to the Pipewire developers.
Disable that bullshit by default. Unlike me, you will also find a clean solution for this which only affects outputs that are susceptible to the —POP— and —HUMMMMING— problem.
https://redd.it/1pn41yb
@r_linux
Reddit
From the linux community on Reddit
Explore this post and more from the linux community
This media is not supported in your browser
VIEW IN TELEGRAM
Journiv v0.1.0-beta.10: Timeline, Calendar View and Dynamic Tag Support
https://redd.it/1pnc3tr
@r_linux
https://redd.it/1pnc3tr
@r_linux
Linux for family; someone who tried, and my thoughts
Hi! Hope everyone is having a good winter so far.
After about a year of using Linux, I’ve gotten a pretty good footing for what I want, and what I use. Distrohopping for the first month was pretty diseased but it helped me find exactly what I wanted, and I think that’s partially what helped me learn so quickly. But now, i have a different goal.
The old computer at my grandmothers that i used to play web games and Roblox on as a wee boy is still running today. It’s still running on an old 200GB HDD, and still being used to open outlook. Nothing wrong with it, but I think that there is something better in store for it rather than struggling to open web docs.
Distro of choice; fedora kionite, this was chosen for a couple of reasons.
1. I skinned KDE to look EXACTLY like windows 7, down to every last icon that was on the screen. I didn’t want her to feel like she was being thrown onto something she didn’t use before, and it wouldn’t be right to do so.
2. Stability. Yes, Debian could’ve worked or you could even suggest something different but keeping a system image as a backup is great. If something ever goes wrong, I wrote down on a sticky note how to bring back the previous image so she’ll be up and running in no time.
3. Containered system. it very easy for her to get applications, and can pretty much guarantee nothing interacts with the core system
After about a month using this setup, here are some thoughts that both she and I have come up with.
User: (98% of use is a web browser)
Snappier than windows, turns on faster
Internet pages load faster, less time waiting
Printer issues sometimes where it’ll “print” but refuse to actually queue the print job
Everything works as intended
My thoughts:
VERY easy to setup
Low maintenance
Got one complaint, and it was just for printing, everything else went smoothly
I did install Adblock and not get AV1, which did help a bit (chromium was used for familiarity)
Linux is a great alternative for old devices, or even people that aren’t as tech savvy that want a regular browser experience. If the hardware isn’t up for modern operating systems, seems like a decent option to try to keep some hardware out of the garbage
https://redd.it/1pnfezb
@r_linux
Hi! Hope everyone is having a good winter so far.
After about a year of using Linux, I’ve gotten a pretty good footing for what I want, and what I use. Distrohopping for the first month was pretty diseased but it helped me find exactly what I wanted, and I think that’s partially what helped me learn so quickly. But now, i have a different goal.
The old computer at my grandmothers that i used to play web games and Roblox on as a wee boy is still running today. It’s still running on an old 200GB HDD, and still being used to open outlook. Nothing wrong with it, but I think that there is something better in store for it rather than struggling to open web docs.
Distro of choice; fedora kionite, this was chosen for a couple of reasons.
1. I skinned KDE to look EXACTLY like windows 7, down to every last icon that was on the screen. I didn’t want her to feel like she was being thrown onto something she didn’t use before, and it wouldn’t be right to do so.
2. Stability. Yes, Debian could’ve worked or you could even suggest something different but keeping a system image as a backup is great. If something ever goes wrong, I wrote down on a sticky note how to bring back the previous image so she’ll be up and running in no time.
3. Containered system. it very easy for her to get applications, and can pretty much guarantee nothing interacts with the core system
After about a month using this setup, here are some thoughts that both she and I have come up with.
User: (98% of use is a web browser)
Snappier than windows, turns on faster
Internet pages load faster, less time waiting
Printer issues sometimes where it’ll “print” but refuse to actually queue the print job
Everything works as intended
My thoughts:
VERY easy to setup
Low maintenance
Got one complaint, and it was just for printing, everything else went smoothly
I did install Adblock and not get AV1, which did help a bit (chromium was used for familiarity)
Linux is a great alternative for old devices, or even people that aren’t as tech savvy that want a regular browser experience. If the hardware isn’t up for modern operating systems, seems like a decent option to try to keep some hardware out of the garbage
https://redd.it/1pnfezb
@r_linux
Reddit
From the linux community on Reddit
Explore this post and more from the linux community
GIMP 3.2 RC2: Second Release Candidate for GIMP 3.2
https://www.gimp.org/news/2025/12/15/gimp-3-2-RC2-released/
https://redd.it/1pnpist
@r_linux
https://www.gimp.org/news/2025/12/15/gimp-3-2-RC2-released/
https://redd.it/1pnpist
@r_linux
www.gimp.org
GIMP - GIMP 3.2 RC2: Second Release Candidate for GIMP 3.2
Release news for version GIMP 3.2 RC2
This includes KDE Connect/Gconnect
https://www.reddit.com/r/apple/comments/1pni243/ios_263_adds_notification_forwarding_option_for/
https://redd.it/1pnobqu
@r_linux
https://www.reddit.com/r/apple/comments/1pni243/ios_263_adds_notification_forwarding_option_for/
https://redd.it/1pnobqu
@r_linux
Reddit
From the apple community on Reddit: iOS 26.3 Adds Notification Forwarding Option for Third-Party Wearables
Explore this post and more from the apple community
Your opinion?
Well, after the news with RAM prices, in combination with the company strategies from Microsoft and Google, I think the Linux distros will be more interesting for every user and highly in demand next year.
I mean they are faster than Apple, easier to handle than Microsoft and with higher security level, and open to programs not only from the own environment (like google and apple).
Whats your opinion?
https://redd.it/1po046t
@r_linux
Well, after the news with RAM prices, in combination with the company strategies from Microsoft and Google, I think the Linux distros will be more interesting for every user and highly in demand next year.
I mean they are faster than Apple, easier to handle than Microsoft and with higher security level, and open to programs not only from the own environment (like google and apple).
Whats your opinion?
https://redd.it/1po046t
@r_linux
Reddit
From the linux community on Reddit
Explore this post and more from the linux community
HomeBox - A simple home inventory management software
https://homebox.software/en/
https://redd.it/1po0he5
@r_linux
https://homebox.software/en/
https://redd.it/1po0he5
@r_linux
homebox.software
A simple home inventory management software
How realistic is it to give a child (around 7 years old) a computer/laptop with only Linux on it
keep in mind parents have a finance/medicine background with no tech knowledge and probably never heard of Linux before. i can obviously help him but i see him maybe twice a month, so i cannot be anything like a mentor or a guide.
i really see potential already from the way he acts and the way he approaches problems and how he solves them. his parents trust me with him but I'm not available enough end he has to be somewhat independent
https://redd.it/1po3y5q
@r_linux
keep in mind parents have a finance/medicine background with no tech knowledge and probably never heard of Linux before. i can obviously help him but i see him maybe twice a month, so i cannot be anything like a mentor or a guide.
i really see potential already from the way he acts and the way he approaches problems and how he solves them. his parents trust me with him but I'm not available enough end he has to be somewhat independent
https://redd.it/1po3y5q
@r_linux
Reddit
From the linux community on Reddit
Explore this post and more from the linux community
Fedora 44 Could Work Nicely "Out Of The Box" On Snapdragon-Powered Windows ARM Laptops
https://www.phoronix.com/news/Fedora-44-ARM-OOTB
https://redd.it/1po4wyw
@r_linux
https://www.phoronix.com/news/Fedora-44-ARM-OOTB
https://redd.it/1po4wyw
@r_linux
Phoronix
Fedora 44 Could Work Nicely "Out Of The Box" On Snapdragon-Powered Windows ARM Laptops
Longtime Red Hat engineer Hans de Goede who worked on many Intel/AMD laptop enhancements over the years left Red Hat and ended up joining Qualcomm
Shocked by Linux speed
I’ve been in IT for over 3 years, and I’ve never really dabbled in Linux but have followed this page and a few others for a while.
I got my hands on an old potato (HP), and thought it’d be a good time to try Linux.
Was actually amazed at the speed, had windows on it before and it was a slow experience, whereas Ubuntu has ran incredible.
Didn’t expect to like Linux, but seriously considering doing it for my main - major major upgrade.
Bit stuck on what is worth learning (I work security), but sure I’ll pick it up over time.
Great community
https://redd.it/1po6282
@r_linux
I’ve been in IT for over 3 years, and I’ve never really dabbled in Linux but have followed this page and a few others for a while.
I got my hands on an old potato (HP), and thought it’d be a good time to try Linux.
Was actually amazed at the speed, had windows on it before and it was a slow experience, whereas Ubuntu has ran incredible.
Didn’t expect to like Linux, but seriously considering doing it for my main - major major upgrade.
Bit stuck on what is worth learning (I work security), but sure I’ll pick it up over time.
Great community
https://redd.it/1po6282
@r_linux
Reddit
From the linux community on Reddit
Explore this post and more from the linux community
UK Lawmakers Propose Mandatory On-Device Surveillance and VPN Age Verification, what does that mean for linux, in particular ubuntu?
https://reclaimthenet.org/uk-lawmakers-propose-mandatory-on-device-surveillance-and-vpn-age-verification
https://redd.it/1po3cbg
@r_linux
https://reclaimthenet.org/uk-lawmakers-propose-mandatory-on-device-surveillance-and-vpn-age-verification
https://redd.it/1po3cbg
@r_linux
Reclaim The Net
UK Lawmakers Propose Mandatory On-Device Surveillance and VPN Age Verification
The UK flirts with an extreme future where every device is surveilled.
As a (now ex) Windows user:I finally understand why People love the terminal
Alrighty, I switched to Linux around 2 months ago and as soon as I did that I truely understood the love that the terminal gets.
So this is how it started: I switched to Windows 11 as soon as it released since I wasn't a big fan of Windows 10 anymore... I actually really loved Windows 10 around the 2017 to 2019 mark. I thought it was a great operating system and I would honestly say that it was one (If not the best) Windows ever made. But around 2020 it started going downhill, there were more and more ads included into the operating system, and more features were integrated that I thought were just useless.
Little did I know that my biggest nightmare started with the switch to Windows 11...
Omg I literally hate everything about Windows 11... I hate how it looks with it's overly corporate soulless design, (Can't say that Windows 10 was super great either but it had cool and interesting things, like the fact that the original "Hero" wallpaper of Windows 10 were 4 metal tubes that they shot light through to create the "Windows logo effect". And it was generally more interesting to look at. The metro tiles also gave Me XBOX 360 vibes.
But I also hate the layout of Windows 11. The start menu is just a bunch of random apps cluttered together and the settings panel is the worst thing I've ever seen.
And that is exactly what made Me realize that the terminal is great... The settings panel... Or should I say the setting panelS. I wanted to change something about my power settings since my PC wouldn't shut down completely when I would turn it off using the Windows start menu.
So I simply went into the Windows settings and searched for "Power" only to come to basically nowhere. Then I clicked around the Windows settings for around 20 minutes without getting anywhere. Then I went into the stupid outdated Control Panel and clicked around it's horrible trash UI for another 10 minutes before FINALLY finding the setting I was looking for.
And I also only found it because I just started searching on Google where I can change that setting... And then I got to an article that first tells Me why the feature was implemented, and why it has problems, and why You should turn it off, before it then tells Me where to change the setting in way to many steps.
Then I was testing around with Fedora a bit and wanted to change a setting (Can't really remember what it was) but I could change it within a couple of seconds using just the Terminal. That was where I realized that the terminal might not be as fast for copy and pasting files (Except maybe You do it in bulk or with a complex file structure) but that the Terminal is great for so many other things.
I still have trauma from the Windows Control Panel and it really pushed Me over the last ledge to switch to Linux.
https://redd.it/1po8fo7
@r_linux
Alrighty, I switched to Linux around 2 months ago and as soon as I did that I truely understood the love that the terminal gets.
So this is how it started: I switched to Windows 11 as soon as it released since I wasn't a big fan of Windows 10 anymore... I actually really loved Windows 10 around the 2017 to 2019 mark. I thought it was a great operating system and I would honestly say that it was one (If not the best) Windows ever made. But around 2020 it started going downhill, there were more and more ads included into the operating system, and more features were integrated that I thought were just useless.
Little did I know that my biggest nightmare started with the switch to Windows 11...
Omg I literally hate everything about Windows 11... I hate how it looks with it's overly corporate soulless design, (Can't say that Windows 10 was super great either but it had cool and interesting things, like the fact that the original "Hero" wallpaper of Windows 10 were 4 metal tubes that they shot light through to create the "Windows logo effect". And it was generally more interesting to look at. The metro tiles also gave Me XBOX 360 vibes.
But I also hate the layout of Windows 11. The start menu is just a bunch of random apps cluttered together and the settings panel is the worst thing I've ever seen.
And that is exactly what made Me realize that the terminal is great... The settings panel... Or should I say the setting panelS. I wanted to change something about my power settings since my PC wouldn't shut down completely when I would turn it off using the Windows start menu.
So I simply went into the Windows settings and searched for "Power" only to come to basically nowhere. Then I clicked around the Windows settings for around 20 minutes without getting anywhere. Then I went into the stupid outdated Control Panel and clicked around it's horrible trash UI for another 10 minutes before FINALLY finding the setting I was looking for.
And I also only found it because I just started searching on Google where I can change that setting... And then I got to an article that first tells Me why the feature was implemented, and why it has problems, and why You should turn it off, before it then tells Me where to change the setting in way to many steps.
Then I was testing around with Fedora a bit and wanted to change a setting (Can't really remember what it was) but I could change it within a couple of seconds using just the Terminal. That was where I realized that the terminal might not be as fast for copy and pasting files (Except maybe You do it in bulk or with a complex file structure) but that the Terminal is great for so many other things.
I still have trauma from the Windows Control Panel and it really pushed Me over the last ledge to switch to Linux.
https://redd.it/1po8fo7
@r_linux
Reddit
From the linux community on Reddit
Explore this post and more from the linux community
Is it getting harder to develop desktop apps as desktop environments diverge further away from one another?
Note: This is not a wayland vs xorg debate, but rather curious how to overcome some app development challenges in wayland.
I was thinking what would it take if I want to contribute to a project like YomiNinja to make it work in wayland? Have a look at the 1 minute video in the project page to get some context.
I can’t rely on xdotool in wayland and I can’t rely only on wlroots since KWin and Mutter don’t use it, so it seems like I’ll have to code for different APIs to support KWin, Mutter, and wlroots. For example, on KDE I’ll probably have to use the KWin noscripting API to get the active window, the cursor position, etc. then I’ll have to figure out how to do the same thing in Mutter and wlroots.
XDG Desktop Portal seems like a perfect fit here but there seems to be some resistance for asking for these kind of "portals", here is an example of a request "Add a portal to see currently open windows" that's been open since 2019, from reading the messages there it seems to be 2 recurring concerns that is holding this back:
1. Security concerns: I think it’s better to respect end-users by giving them the choice to allow or deny permissions in a prompt rather than resisting to add the portal which completely removes the choice from the user
2. If this portal is relevant for a flatpak app: Portals are useful even without using flatpak since it's a way for app developers to avoid writing desktop-specific code
In the absence of Xorg’s APIs as a common denominator it feels like desktop environments are going to continue to diverge. Desktop environments might have their own implementation and API for each “missing” wayland protocol. This makes it more important for having XDG Desktop Portal be more than just a flatpak tool that's just developed for flatpak relevant use cases.
The easier it is to make apps for desktop linux for all kinds of use cases (time tracking, assisstive tech, OCR, etc.) the more people and companies will use it which hopefully increase investments in improving linux.
What's the community's opinion on this?
https://redd.it/1poci59
@r_linux
Note: This is not a wayland vs xorg debate, but rather curious how to overcome some app development challenges in wayland.
I was thinking what would it take if I want to contribute to a project like YomiNinja to make it work in wayland? Have a look at the 1 minute video in the project page to get some context.
I can’t rely on xdotool in wayland and I can’t rely only on wlroots since KWin and Mutter don’t use it, so it seems like I’ll have to code for different APIs to support KWin, Mutter, and wlroots. For example, on KDE I’ll probably have to use the KWin noscripting API to get the active window, the cursor position, etc. then I’ll have to figure out how to do the same thing in Mutter and wlroots.
XDG Desktop Portal seems like a perfect fit here but there seems to be some resistance for asking for these kind of "portals", here is an example of a request "Add a portal to see currently open windows" that's been open since 2019, from reading the messages there it seems to be 2 recurring concerns that is holding this back:
1. Security concerns: I think it’s better to respect end-users by giving them the choice to allow or deny permissions in a prompt rather than resisting to add the portal which completely removes the choice from the user
2. If this portal is relevant for a flatpak app: Portals are useful even without using flatpak since it's a way for app developers to avoid writing desktop-specific code
In the absence of Xorg’s APIs as a common denominator it feels like desktop environments are going to continue to diverge. Desktop environments might have their own implementation and API for each “missing” wayland protocol. This makes it more important for having XDG Desktop Portal be more than just a flatpak tool that's just developed for flatpak relevant use cases.
The easier it is to make apps for desktop linux for all kinds of use cases (time tracking, assisstive tech, OCR, etc.) the more people and companies will use it which hopefully increase investments in improving linux.
What's the community's opinion on this?
https://redd.it/1poci59
@r_linux
GitHub
GitHub - matt-m-o/YomiNinja: Open-source OCR and dictionary tool.
Open-source OCR and dictionary tool. Contribute to matt-m-o/YomiNinja development by creating an account on GitHub.
Danish head of government IT (left) hands over the first "microsoft-free" computer to the head of Danish Traffic control, December 2025
https://redd.it/1pohupu
@r_linux
https://redd.it/1pohupu
@r_linux