#Moonflower #A12L #A13 #Kernel #Walleye #Taimen
Moonflower Kernel v2.7 - "Plini - PAN" | Android 12L/13
Updated: 23/01/2023

▪️Download (repartitioned)
▪️Download (non repartitioned)

Changelog:
• Overclocked little cpu cores to 2112 Mhz.
• Update efficient frequencies from kdrag0n's freqbench data with with IRQ storm fixed.
• Wifi bonding. Make 2.4Ghz/5Ghz WiFi running at 40Mhz enabled.
• Force triple frame buffering. Although ROMs have enabled this, kernel was hardcoded to do double buffering only.
• Low latency performance tuning from Red Hat Enterprise Linux.
• Zram deduplication. Deduplicate ZRAM data to reduce amount of memory consumption. Thanks @arter97
• Change 'memlat' governor from 'powersave' to 'mem_latency' as it should be.
• Change 'mincpubw' governor from 'cpufreq' to 'powersave' for power saving (lol).
• 32 bit audio processing for Pixel 2 XL's speaker.
• Make flicker_free driver aware of Always On Display feature. Only for rooted users (Disable by default).
Reason: it only works well with Pixel's "Saturation" display color mode.
• Import latest version of ARM Optimized Routines.
• Microoptimize fingerprint drivers by inlining some functions.
• Scheduler: Remove potential scheduling delays and optimize load balancer behavior in recognising cross-socket imbalance forced by affinity mask.
• Sched/fair: Add asymmetric CPU capacity wakeup scan.
• Update ARM64_HAS_CRC32 feature and consistently enable it.
• Update KCAL, VDSO optimisations, Memory management fixes, Scheduler fixes, disable TRACE_PRINTK.
• Change some spinlocks to raw spinlocks in some crucial paths for latency.
• Avoid dynamic memory allocation in power_supply_sysfs.
• Refactor some selinux related codes.
And more, full changelog is on my github release page.

By @jijanloe
Follow @Pixel2Updates
Join @Pixel2Chat

#crDroid #Unofficial #A12L #ROM #Taimen
crDroid v8.13 - UNOFFICIAL | Android 12.1 | Pixel 2 XL (taimen)
Updated: 26/1/2023

▪️Vanilla [971MB]
▪️Gapps [1.1GB]
▪️Support Group

Changelog:
• January 2023 Security Patch
• Enabled VoLTE & VoWIFI via mbn files & system props
• Set ZRAM to 2.5GB

By @igram96
Follow @Pixel2Updates
Join @Pixel2Chat

#LineageOS #Official #A13 #ROM #Taimen
LineageOS 20 - OFFICIAL | Android 13 | Pixel 2 XL (taimen)
Updated: 2/2/2023

▪️Download [851MB]
▪️XDA
▪️Support Group

Changelog:
• Initial LineageOS 20 official build
• Trebuchet: Allow changing app suggestion settings
• Clock: Android 13 bringup
• Seedvault: Bump version to 13-3.3, with updated translations
• Update Android TZDB from 2022f to 2022g
• Aperture: Material You support
• Source Changelog

Notes:
• How to flash guide
• Upgrading from 19.1 official guide

By @npjohnson, @Eamo5, chrmhoffmann
Follow @Pixel2Updates
Join @Pixel2Chat

Google Pixel General Update Channel (ENG)
All about Google latest development news! We cover Android, Google apps, Pixel, Workspace and many more in English content.

Follow t.me/PixelHubUpdates
Join t.me/PixelDevelopment

🎉 Pixel 2 Community 2 Year Anniversary Special Post 🎉
Two years later, we are now nearly at the 4 digits milestone, a little pity that we are just a few more away but the two year anniversary came first. Anyway, just want to thank all of you who are currently supporting the community, it wouldn't be possible without you guys.

So Android 13 for both Pixel 2 models, nice to know it, big applause to @reallysnow for making it possible at first. Talking about Android versions, old is gold actually. If you haven't checked out the older versions before, you should give it a try if you can.

Pixel 2 series released back with Oreo, which have the legacy Material Design and most applications can still run at the time of posting, so daily driving it isn't a problem actually. Also, the phone works better as the OS itself is lighter compared to the newer versions. Anyway yeah, the option is up to you over here, that's just my personal opinion.

Being a 5 years old device, I heard some people are still using it as their daily driver, yeah, as long as your phone works properly, you should continue to use it. Too bad if you have faced issues like the camera not functioning, but let's see how many of you guys still have it going strong till today.

I don't have anything much to say over here, but fingers crossed the development won't be dead over the coming months and years to come, recently we also saw a new kernel released by our community members, nice to see that. Also just want to apologise if some ROMs post couldn't get post on time, have been getting busier than usual. By the way, if you are curious about the latest Google development, definitely do give our channel a follow, and thanks for reading if you did.

#ProjectElixir #Official #A13 #ROM #Walleye #Taimen
Project Elixir v3.5 - OFFICIAL | Android 13
Updated: 28/01/2023

▪️Download
▪️Screenshots

Changelog:
• Source changelog
• Device changelog: walleye | taimen

Notes:
• This build requires you to modify your partition table on your device in order to flash
• Read the following instructions before flashing

By @asriadirahim
Follow @Pixel2Updates
Join @Pixel2Chat

#LineageOS #Official #A13 #ROM #Walleye
LineageOS 20 - OFFICIAL | Android 13 | Pixel 2 (walleye)
Updated: 31/1/2023

▪️Download [830MB]
▪️XDA
▪️Support Group

Changelog:
• Initial LineageOS 20 official build
• Trebuchet: Allow changing app suggestion settings
• Clock: Android 13 bringup
• Seedvault: Bump version to 13-3.3, with updated translations
• Update Android TZDB from 2022f to 2022g
• Aperture: Material You support
• Source Changelog

Notes:
• How to flash guide
• Upgrading from 19.1 official guide

By @npjohnson, @Eamo5, chrmhoffmann
Follow @Pixel2Updates
Join @Pixel2Chat

Update: LineageOS 20 for Pixel 2 XL (taimen) is released.

#LineageOS #Official #Archive #A12 #Walleye #Taimen
📁 LineageOS 19.1 Official Build Archive for Pixel 2 & Pixel 2 XL
Recently the Pixel 2 series has been promoted to receive official LineageOS 20 builds, which means there won't be any updates for the older 19.1 builds anymore.

A little unfortunate is that LineageOS isn't willing to keep any old builds available. Usually, only the last four builds will be kept on the server, which means after one month from now, you won't be able to get any 19.1 builds from their website anymore, hence this archive is made.

We also made an archive for all Pixel models which you can find over at the Google Pixel Development group. Feel free to share with those who need it one day.

Follow @Pixel2Updates
Join @Pixel2Chat

#LMOdroid #Official #A12L #ROM #Taimen
LMODroid 3.3 - OFFICIAL | Android 12L
Updated: 04/02/2023 (taimen) | 25/01/2023 (walleye)

▪️walleye
▪️taimen
▪️Support Group

Changelog:
walleye | taimen

By LibreMobileOS Foundation
Follow @Pixel2Updates
Join @Pixel2Chat

#PixelDust #PD #Official #A13 #ROM #Taimen
PixelDust 13 - OFFICIAL | Android 13 | Pixel 2 XL (taimen)
Updated: 05/02/2023

▪️Download
▪️XDA
▪️Screenshot

Changelog:
• Lags have been fixed
• January Security Patch

Notes:
• ROM zip includes minimal gapps, no need to flash separate gapps package
• Flash it like any other ROM, repartition is needed
• Build is enforcing

By @Nitin1438
Follow @Pixel2Updates
Join @Pixel2Chat

#LineageOS #Official #A13 #ROM #Walleye
LineageOS 20 - OFFICIAL | Android 13 | Pixel 2 (walleye)
Updated: 7/2/2023

▪️Download [831MB]
▪️XDA
▪️Support Group

Changelog:
• Camera: Use M3 colors for shutter button
• Camera: Make video duration text more readable
• Camera: Fix photo -> video shutter button color transition
• Source Changelog

By @npjohnson, @Eamo5, chrmhoffmann
Follow @Pixel2Updates
Join @Pixel2Chat

#crDroid #Unofficial #A13 #ROM #Taimen
crDroid v9.1 - UNOFFICIAL | Android 13 | Pixel 2 XL (taimen)
Updated: 08/2/2023

▪️Gapps [1.1GB]
▪️Support Group

Changelog:
• Initial test build
• January patch

By @igram96

#xdroidOSS #Unofficial #A13 #ROM #Walleye #Taimen
xdroidOSS - UNOFFICIAL v13.0.30 | Android 13
Updated: 09/02/2023

▪️Walleye
▪️Taimen
▪️Screenshot

Changelog:
• February 2023 security patch
• Increase product partition size to 3GB
• Drop debug.hwui.use_buffer_age (fixed lag)
• Update multiple vibration strength levels overlay for 13
• Fixed battery widget
• Fixed glitch onehand mode
• Set recovery density to xhdpi and save more space (taimen)
• Set recovery density to mdpi and save more space (walleye)
• Fixup switch to xz ramdisk and save some space
• Fixed google camera autoupdate

Notes:
• SafetyNet passed by default
• User build type
• Clean flash always be recommended
• This build requires you to modify your partition table on your device in order to flash so Product Partition Extended zip required to be flashed
Read the following instructions before flashing

By @asriadirahim
Follow @Pixel2Updates
Join @Pixel2Chat